SD: TEAM DRIVEN/NISSANCLUB.COM Group Dyno Day, Saturday, January 31, 2004
#25
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cyberz350
That's actually a perfect time, I need to get my nitrous setup dyno'd. Will we get A/F numbers as well?
That's actually a perfect time, I need to get my nitrous setup dyno'd. Will we get A/F numbers as well?
#26
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
As we get closer and closer to dyno day, I need you guys to let me know if you're 100% confirmed so please post here or on the main thread at ALTIMAS.NET or e-mail me Ry@altimas.net.
#27
Registered User
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
I am in. i actually need to go out there on the 30th for a basline. could you set it up for me for thursday as well?
thursday jan 30 - baseline with all mods listed below.
after baseline i will go home and install lsdunique's high flow cats.
friday jan 31 - two runs for the high flow cats so we can post what they do. After this run i will then install lsdunique's new prototype plenum and go back in for two more runs.
total runs = 6-9, 2-3 on thursday, 4-6 on friday.
any deals for that?
thanks.
thursday jan 30 - baseline with all mods listed below.
after baseline i will go home and install lsdunique's high flow cats.
friday jan 31 - two runs for the high flow cats so we can post what they do. After this run i will then install lsdunique's new prototype plenum and go back in for two more runs.
total runs = 6-9, 2-3 on thursday, 4-6 on friday.
any deals for that?
thanks.
#28
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by all_bark
I am in. i actually need to go out there on the 30th for a basline. could you set it up for me for thursday as well?
thursday jan 30 - baseline with all mods listed below.
after baseline i will go home and install lsdunique's high flow cats.
friday jan 31 - two runs for the high flow cats so we can post what they do. After this run i will then install lsdunique's new prototype plenum and go back in for two more runs.
total runs = 6-9, 2-3 on thursday, 4-6 on friday.
any deals for that?
thanks.
I am in. i actually need to go out there on the 30th for a basline. could you set it up for me for thursday as well?
thursday jan 30 - baseline with all mods listed below.
after baseline i will go home and install lsdunique's high flow cats.
friday jan 31 - two runs for the high flow cats so we can post what they do. After this run i will then install lsdunique's new prototype plenum and go back in for two more runs.
total runs = 6-9, 2-3 on thursday, 4-6 on friday.
any deals for that?
thanks.
#29
Registered User
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
well, ok then, how about me going in alone on friday and then getting two more sets of runs on saturday.
who did you set this up with at the dyno shop in santee or could you check for me?
who did you set this up with at the dyno shop in santee or could you check for me?
#31
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by all_bark
well, ok then, how about me going in alone on friday and then getting two more sets of runs on saturday.
who did you set this up with at the dyno shop in santee or could you check for me?
well, ok then, how about me going in alone on friday and then getting two more sets of runs on saturday.
who did you set this up with at the dyno shop in santee or could you check for me?
I don't think you'll get the $40 price if you go there on Friday. I believe their group dyno days are only on Saturdays and require at least 10 cars.
#32
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Re: Printouts
Originally posted by ChrisMCagle
I assume we'll get printouts of our runs? If so, I'm definitely in! :-D
-Chrismcagle
I assume we'll get printouts of our runs? If so, I'm definitely in! :-D
-Chrismcagle
#34
Registered User
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
couple of things for everybody. i just got off the phone with randy at the dyno shop.
1 - people NEED to be there 8:30 - 9:00 am on saturday. He says they will go back to back to back with every car until they are done. After that the close up shop and go home. He thinks (if 15 cars show up) that he will be done and gone no later than 12:00 pm.
If you plan to come down from LA you should get on the road early and try to be there no later than 10:30-11:00.
Are there any people on the list that cannot make it that early?
2 - he said he needs to get access to an tachometer wire for the dyno. he thinks (i do not know) that it could be under the plastic engine cover. if it is and you do not remove it he said there will be an extra charge of $5.00 for them to do it. So if you want to save the $5.00 take it off before driving over. (If of course the tach wire is located under the plastic engine cover.)
ANYBODY KNOW ABOUT THAT?
1 - people NEED to be there 8:30 - 9:00 am on saturday. He says they will go back to back to back with every car until they are done. After that the close up shop and go home. He thinks (if 15 cars show up) that he will be done and gone no later than 12:00 pm.
If you plan to come down from LA you should get on the road early and try to be there no later than 10:30-11:00.
Are there any people on the list that cannot make it that early?
2 - he said he needs to get access to an tachometer wire for the dyno. he thinks (i do not know) that it could be under the plastic engine cover. if it is and you do not remove it he said there will be an extra charge of $5.00 for them to do it. So if you want to save the $5.00 take it off before driving over. (If of course the tach wire is located under the plastic engine cover.)
ANYBODY KNOW ABOUT THAT?
#36
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Re: Printouts
Originally posted by ChrisMCagle
Woo Hoo!!
Can you post the list of everyone who is signed up?
-Chrismcagle
Woo Hoo!!
Can you post the list of everyone who is signed up?
-Chrismcagle
- Ry
- XOoET64oOX
- UltimaSE
- Warped
- BA
- MM (maybe getting two slots)
- TweekersAltima
- Rdhuran
- djtrickz
- MIAPLAYA (Z)
- MIAPLAYA (Frontier)
- Rama (Nissan Forums)
- AznVirus (Nissan Forums)
- SteaminRice (My350Z)
- all_bark (My350Z)
- 350z4steve (My350Z)
- shaun_walsh (My350Z)
- weed101160
- vromanray
- NOTORIOUS170
- 87camarodan
- Jeff@Performance (My350Z)
- Jason@Performance (My350Z)
- cyberz350
- Nizzan4u2nv (SR20Forum)
- 01GXEWhitey (B15Sentra)
- maximadave (Maxima.org)
- Mr Sentra
- StealthB14
- SR20 Who Knew?
- krmaxima (Maxima.org)
- soulchild (Maxima.org)
- albertz
- iczer200sx (SR20Forum)
- _SE-R_ (SR20Forum)
- 240SXDrifter
- al8b
- wdsonny
- wdsonny's friend
- fc enrique
- ChrisMCagle (My350Z)
#37
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by all_bark
couple of things for everybody. i just got off the phone with randy at the dyno shop.
1 - people NEED to be there 8:30 - 9:00 am on saturday. He says they will go back to back to back with every car until they are done. After that the close up shop and go home. He thinks (if 15 cars show up) that he will be done and gone no later than 12:00 pm.
If you plan to come down from LA you should get on the road early and try to be there no later than 10:30-11:00.
Are there any people on the list that cannot make it that early?
2 - he said he needs to get access to an tachometer wire for the dyno. he thinks (i do not know) that it could be under the plastic engine cover. if it is and you do not remove it he said there will be an extra charge of $5.00 for them to do it. So if you want to save the $5.00 take it off before driving over. (If of course the tach wire is located under the plastic engine cover.)
ANYBODY KNOW ABOUT THAT?
couple of things for everybody. i just got off the phone with randy at the dyno shop.
1 - people NEED to be there 8:30 - 9:00 am on saturday. He says they will go back to back to back with every car until they are done. After that the close up shop and go home. He thinks (if 15 cars show up) that he will be done and gone no later than 12:00 pm.
If you plan to come down from LA you should get on the road early and try to be there no later than 10:30-11:00.
Are there any people on the list that cannot make it that early?
2 - he said he needs to get access to an tachometer wire for the dyno. he thinks (i do not know) that it could be under the plastic engine cover. if it is and you do not remove it he said there will be an extra charge of $5.00 for them to do it. So if you want to save the $5.00 take it off before driving over. (If of course the tach wire is located under the plastic engine cover.)
ANYBODY KNOW ABOUT THAT?
#38
Registered User
Join Date: Aug 2003
Location: Massillon, OH
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Group from OC
Originally posted by Ryan
A group out of LA is leaving at around 7 to try to make it by 9.
A group out of LA is leaving at around 7 to try to make it by 9.
-Chrismcagle
#39
Registered User
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Re: Group from OC
Originally posted by ChrisMCagle
I'll be leaving from Orange County (near Anaheim Stadium) around 6:30 to 7:00 AM. If anyone else is in the area maybe we could meet up somewhere around that time and go in a group?
-Chrismcagle
I'll be leaving from Orange County (near Anaheim Stadium) around 6:30 to 7:00 AM. If anyone else is in the area maybe we could meet up somewhere around that time and go in a group?
-Chrismcagle