Would anyone in SoCal be interested in these CF Sides??
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Would anyone in SoCal be interested in these CF Sides??
Extreme dimensions is part of carbon creations who sells universal side splitters that quite a few people have bought and put on the Z. Here's a pic of one Z running them:
Anyways, I live right next to them and was told they cost $283 picked up. Would any locals be interested in purchasing a set with me? One set of universal side splitters actually makes 2 pairs of side skirts so we could both pay $142.50 and both have a set of new sides.
Please note, you will have to cut these sides in half in order to use them. (info from srry110, he's done it on his car and I'm sure he can answer questions regarding it if you ask). If anyone has any questions let me know. Mods, I wasn't sure if you'd want this in the marketplace or not so feel free to move it to what you feel is fitting.
Anyways, I live right next to them and was told they cost $283 picked up. Would any locals be interested in purchasing a set with me? One set of universal side splitters actually makes 2 pairs of side skirts so we could both pay $142.50 and both have a set of new sides.
Please note, you will have to cut these sides in half in order to use them. (info from srry110, he's done it on his car and I'm sure he can answer questions regarding it if you ask). If anyone has any questions let me know. Mods, I wasn't sure if you'd want this in the marketplace or not so feel free to move it to what you feel is fitting.
#2
Registered User
iTrader: (1)
Join Date: Jan 2004
Location: Orange County, CA
Posts: 1,407
Likes: 0
Received 0 Likes
on
0 Posts
Hmm might be interested. Ill have to look into this.. seems similar to the s2000's side splitters. I also live about 30 seconds away from ED.
Last edited by superstuddc27; 11-27-2013 at 12:56 AM.
#3
Registered User
iTrader: (13)
Join Date: Dec 2010
Location: Riverside County
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
These look like roush mustang sides, which some have made to fit our cars through some trimming. Same price.
On the other hand, there is a guy on FB (Prosplitters) who is selling sides that also look the same as these with no trimming required (or pre trimmed, I dont remember) but it was $80 or ~$100 shipped conus 48 states.
On the other hand, there is a guy on FB (Prosplitters) who is selling sides that also look the same as these with no trimming required (or pre trimmed, I dont remember) but it was $80 or ~$100 shipped conus 48 states.
#4
Registered User
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the heads up Peter. Looks like a good alternative.
To those of you curious of how to cut these, you would need a dremel with a fiberglass reinforced pad (or similar rotary tool) for cutting the sides. Srry110 was kind enough to write the whole thing up in detail for me. You basically measure 4", cut down the side splitter and then place it up against the sides of the car and then cut 5-6" lengthwise since it's a bit longer than the bumper. Like I said, he wrote the whole thing for me in detail, that's just the general idea of what you need to do. I'd post his PM here but it's quite long so if you want to see it PM me.
To those of you curious of how to cut these, you would need a dremel with a fiberglass reinforced pad (or similar rotary tool) for cutting the sides. Srry110 was kind enough to write the whole thing up in detail for me. You basically measure 4", cut down the side splitter and then place it up against the sides of the car and then cut 5-6" lengthwise since it's a bit longer than the bumper. Like I said, he wrote the whole thing for me in detail, that's just the general idea of what you need to do. I'd post his PM here but it's quite long so if you want to see it PM me.
Trending Topics
#14
Registered User
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
I just need a side and a spoiler to finish off the exterior! I'm still looking for someone guys. If I can't find anyone by January I'll just buy 'em myself and sell the other half.
#15
Banned
iTrader: (2)
I've got Shine Spec S CF sides on my Z.These are very conservative pieces.
More of a side trim than a full skirt.Very easy to install .Fit perfect-no mods needed.
Price ispretty reasonable.They will blend with a variety of body parts.
They really visually lower the car.That was my objective.
More of a side trim than a full skirt.Very easy to install .Fit perfect-no mods needed.
Price ispretty reasonable.They will blend with a variety of body parts.
They really visually lower the car.That was my objective.
Last edited by JCITY; 12-15-2013 at 01:34 PM.
#17
Registered User
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Come onnnn guys. Get yourself some nifty CF sides! This is one of the last things I have left to add, I'm sure SOMEONE wants a set!! Look at my poor Z with her bare sides! Look at her and tell her she doesn't need sides!!
Seriously though, I've got to pay for my schoolbooks this month. I'm going in alone on this if I don't get any interest by the end of the month.
Seriously though, I've got to pay for my schoolbooks this month. I'm going in alone on this if I don't get any interest by the end of the month.
#19
Registered User
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
I guess I can close this thread then. I bought the set on my own so I'll just put the other set up for sale via the regional thread. If anyone wants these PM me.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
CFAUVEL
Exterior & Interior
3
10-01-2015 03:20 PM