3hree5ive0ero

iTrader: (95)

I have lots of random parts I'd like to try to sell locally first. I can get specific pictures of each, but only upon request by serious buyers. Feel free to contact me via PM so you can schedule a pick up or if you just want to see the condition of the items in person.

All items listed are OBO. If you're interested, just PM me and we'll go from there. The worst I can say is no.

I am also willing to ship any of the items listed, but the buyer must pay for the shipping in full up front.


Items up for sale:

• set of Hawk HPS pads for 03-05 calipers - good amount of pad left on fronts, some left on rears - $25

http://i59.photobucket.com/albums/g3...518_190636.jpg

• set of '03 OEM brake calipers, rotors, lines, and hardware - ~121K miles, still works fine - $50

http://i59.photobucket.com/albums/g3...518_190617.jpg

• set of OEM shocks - from '03 Z w/ 121K miles, still good with no visible damage - FREE

http://i59.photobucket.com/albums/g3...509_194222.jpg

• pair of OEM 03-05 HID headlights - good condition, 2 years of use, comes with OEM HID bulbs (can include other stock bulbs if you ask) - $325

• pair of non-LED 350Z taillights - very good condition (can include stock bulbs if you ask) - $150

• unknown brand 6000K D2S bulbs - as-is (untested by me, but was told they're "like new" when I purchased) - $30

http://i59.photobucket.com/albums/g3...509_192137.jpg
http://i59.photobucket.com/albums/g3...509_192427.jpg
http://i59.photobucket.com/albums/g3...509_192505.jpg
http://i59.photobucket.com/albums/g3...509_192153.jpg

• driver's side Megan Racing resonated test pipe - good condition, no cracks - $30

• driver's side TiTek test pipe - good condition, no cracks - $30

• pair of OEM toe bolts/washers - good condition - FREE

http://i59.photobucket.com/albums/g3...509_191137.jpg
http://i59.photobucket.com/albums/g3...509_191158.jpg
http://i59.photobucket.com/albums/g3...509_191227.jpg

• OEM clutch and pressure plate - unknown miles, but doesn't look like too much (clutch is newer and has less miles than pressure plate) - $100

http://i59.photobucket.com/albums/g3...509_190628.jpg
http://i59.photobucket.com/albums/g3...509_190743.jpg

• pair of OEM rear camber arms - good condition - FREE

http://i59.photobucket.com/albums/g3...509_190253.jpg

• pair of OEM front camber arms - good condition - FREE

http://i59.photobucket.com/albums/g3...509_190149.jpg

• driver's side OEM seatbelts - from '03 350Z, very good condition - $50

http://i59.photobucket.com/albums/g3...509_212359.jpg
http://i59.photobucket.com/albums/g3...509_212429.jpg

• Innovate #3764 Extended bung with plug - brand new - $5

http://i59.photobucket.com/albums/g3...509_231948.jpg

LunchBox20

iTrader: (4)

Interested in y pipe

Where are you located

3hree5ive0ero

iTrader: (95)

There's 2 in front of you for the y-pipe. I'll put you on the list and contact you if the others fall through. Thanks for your interest.

Itzcashew

iTrader: (13)

Dibs on springs.

3hree5ive0ero

iTrader: (95)

^ What does your "dibs" mean? You haven't even contacted me or anything about it.

2004Black350z

iTrader: (37)

i would love to have the springs. 120 shipped sounds fair

3hree5ive0ero

iTrader: (95)

Well, the guy above only called dibs, but never contacted me. PM me if you're serious and we can work out the details so I can ship these out ASAP.

Itzcashew

iTrader: (13)

AWW CRAP! the PM never went thru. Stupid phone!

Contacting NOW!

red350track

iTrader: (7)

what year is the clutch and pressure plate for? thanks

3hree5ive0ero

iTrader: (95)

I know the clutch and pressure plate fits the DEs, but unsure about the HR.

3hree5ive0ero

iTrader: (95)

OP has been updated with new items and a price drop on the springs.

Remember that these are OBO.

3hree5ive0ero

iTrader: (95)

OP updated.. bump

GeauxLadyZ

iTrader: (9)

Does the end of that intake pipe that bolts to filter element have the same pattern/dimensions as the stock MAF tube?

In other words, i guess, if it does i want to use that tube with my popcharger but it has to have the same 4-bolt pattern as the stock MAF tube.

3hree5ive0ero

iTrader: (95)

^ You know I always wondered whether this custom intake would match up to a Popcharger (I have 2) but I figured it wouldn't work. I just took off the filter on the custom intake and what do you know, it most definitely fits the venturi ring supplied with the Popcharger.

Maybe I should keep this now...

GeauxLadyZ

iTrader: (9)

^ Ill take it...pm sent, sir.

3hree5ive0ero

iTrader: (95)

OP updated