[DFW]: DFW's Lounge
Master
iTrader: (8)
I like the spring rate and balance of the car with my square tire setup.(255/40/17) They are to low for me with the 17 inch rims and 255/40 tires. I would hit bottom in many places so that combo is not good for everyday. With my street setup 18 245 /45 the grd clearance is good but you will have to watch the fenders if you have a big offset.
You saw my car on the 17 inch rims and I have raised the spring mounts about 3/8 inch so the car is a little higher than it could be with the stock spring mount location.( The front koni shock has two positions for the spring mount and I made a shim for the rear springs to raise the rear up 3/8 inch.
The pro kits are just a little less spring rate (380F /420R) and not as much drop so they would be a nice option if you dont want to go real low or you want to run big tires with less clearance issues.
You saw my car on the 17 inch rims and I have raised the spring mounts about 3/8 inch so the car is a little higher than it could be with the stock spring mount location.( The front koni shock has two positions for the spring mount and I made a shim for the rear springs to raise the rear up 3/8 inch.
The pro kits are just a little less spring rate (380F /420R) and not as much drop so they would be a nice option if you dont want to go real low or you want to run big tires with less clearance issues.
New Member
iTrader: (11)
I was in 350z heaven yesterday. My Titans driver seat got swapped out with a 2010 seat but while I was there I couldnt help but notice how many Z's were out in the junk yard. Differentials all over the place, Brembos left and right, Engines, etc..
Jason and I used to go there when we would just walk around...lol
Jason and I used to go there when we would just walk around...lol
Master
iTrader: (8)
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
Master
iTrader: (8)
Sleeps in 350Z
iTrader: (5)
Nope. It's like the energizer bunny.
And as far as looking for brembos at a junk yard you'll probably be fine. You can rebuild front and rear for under $100 so that should be on the list since you don't know about their condition. Then you'll want to look for visible signs of damage. If the car was wrecked at that wheel then I would be wary of anything around it.
And as far as looking for brembos at a junk yard you'll probably be fine. You can rebuild front and rear for under $100 so that should be on the list since you don't know about their condition. Then you'll want to look for visible signs of damage. If the car was wrecked at that wheel then I would be wary of anything around it.
Last edited by AllstarE4; 05-30-2012 at 10:05 AM.
New Member
iTrader: (11)
So they have vlsd diffs for 200-250..doesn't seem like a bad price at all. I spy an 3.5 vlsd for 250 with my name on it...they negotiate on pricing?
Last edited by JaE35z; 05-30-2012 at 10:13 AM.
Master
iTrader: (8)
Nope. It's like the energizer bunny.
And as far as looking for brembos at a junk yard you'll probably be fine. You can rebuild front and rear for under $100 so that should be on the list since you don't know about their condition. Then you'll want to look for visible signs of damage. If the car was wrecked at that wheel then I would be wary of anything around it.
And as far as looking for brembos at a junk yard you'll probably be fine. You can rebuild front and rear for under $100 so that should be on the list since you don't know about their condition. Then you'll want to look for visible signs of damage. If the car was wrecked at that wheel then I would be wary of anything around it.
just when i think i am close to done.... the list GROWS
Last edited by travlee; 05-30-2012 at 10:25 AM.
Sleeps in 350Z
iTrader: (5)
Travis why would you want 03 calipers? If you mean Brembo calipers then don't worry. They are the same for all years of the 350Z. You just have to make sure you keep the bolts that thread into the rear Brembo calipers. They are different from the standard caliper.
Master
iTrader: (8)
thats what i meant sir, and thanks for the tip
Registered User
iTrader: (21)
Registered User
iTrader: (2)
Join Date: Dec 2009
Location: TEXAS
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody personally know a Nissan tech that I could talk to? Any dealership in the DFW area will do.
Also Jake let me know if you want to go to that junk yard soon!
Also Jake let me know if you want to go to that junk yard soon!
Living in 350Z
iTrader: (64)
Im looking for a QX56 gauge cluster for the Titan..
Living in 350Z
iTrader: (64)
http://dallas.craigslist.org/dal/cto/3047616509.html also listed in FS thread
GLWS bud..
Master
iTrader: (8)
is it hard to take off the bumper? i want to replace the intake inlet things, my old intakes required me to whac em off, and the stillen ones i have now are made to connect to them like the factory boxes
Master
iTrader: (8)
i got to looking at work today, there is a Z trend starting.... 2 blk convertibles, 1 red convertible, 1 silver coupe, 1 super blk coupe, and mine... and of course i am the odd ball again..... only HR