[DFW]: DFW's Lounge
Master
iTrader: (8)
i would go with the jeep... but that is me.
Registered User
joking - i keep forgetting - maybe since you guys are giving me a hard time about it i'll swap it out - but i'll probably forget by the time i get to the car again -
Registered User
that jeep is sweet - i thought an fx45 was cool too - also bmw x5i I think are kinda cool http://motors.shop.ebay.com/sch/Cars...w=bmw+4.8is+x5
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
1st gen 4.8 X5
New Member
iTrader: (4)
Join Date: Nov 2006
Location: Dallas
Posts: 3,718
Likes: 0
Received 0 Likes
on
0 Posts
Ehh x5s are what I really want, but I'm not willing to pay 50k for one and I refuse to finance. I found one I liked. 13k miles 2011 fully loaded silver with black interior and diesel! It's perfect, but it's 51k back to tahoes I go.
Master
iTrader: (8)
no SUV gets great gas mileage though
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
'08
Master
iTrader: (8)
well i think i may have figured out my popping (and still have to check the lugs to make sure) i now have an exhaust rattle that sounds like a bolt came loose, and since it is loose the whole exhaust is moving and hitting the frame... it was pretty close to the drivers side frame so i am thinking that is it
the way my exhaust is made (invidia gemini) it uses the stock hanger on the drivers side, and the two on the mufflers themselves, but there is nothing on the passenger side to keep it centered and from flexing/shifting. does anyone know how to weld that could put a post on the passenger side so that i can get a hanger on it? i thought i saw a bolt that looks like it would hold a hanger when a shop had it up on a lift. anyone have any other suggestions?
the way my exhaust is made (invidia gemini) it uses the stock hanger on the drivers side, and the two on the mufflers themselves, but there is nothing on the passenger side to keep it centered and from flexing/shifting. does anyone know how to weld that could put a post on the passenger side so that i can get a hanger on it? i thought i saw a bolt that looks like it would hold a hanger when a shop had it up on a lift. anyone have any other suggestions?
Last edited by travlee; 07-16-2012 at 05:30 PM.
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
well i think i may have figured out my popping (and still have to check the lugs to make sure) i now have an exhaust rattle that sounds like a bolt came loose, and since it is loose the whole exhaust is moving and hitting the frame... it was pretty close to the drivers side frame so i am thinking that is it
the way my exhaust is made (invidia gemini) it uses the stock hanger on the drivers side, and the two on the mufflers themselves, but there is nothing on the passenger side to keep it centered and from flexing/shifting. does anyone know how to weld that could put a post on the passenger side so that i can get a hanger on it? i thought i saw a bolt that looks like it would hold a hanger when a shop had it up on a lift. anyone have any other suggestions?
the way my exhaust is made (invidia gemini) it uses the stock hanger on the drivers side, and the two on the mufflers themselves, but there is nothing on the passenger side to keep it centered and from flexing/shifting. does anyone know how to weld that could put a post on the passenger side so that i can get a hanger on it? i thought i saw a bolt that looks like it would hold a hanger when a shop had it up on a lift. anyone have any other suggestions?
If you need a garage to work in you can always use mine if Jakes is occupied.