Notices
Texas Dallas, Austin, Houston, San Antonio, etc.

[DFW]: DFW's Lounge

Thread Tools
 
Search this Thread
 
Old Nov 2, 2012 | 10:11 AM
  #27021  
AndyBGAWTSuhZ's Avatar
AndyBGAWTSuhZ
Registered User
iTrader: (15)
 
Joined: Dec 2010
Posts: 205
Likes: 0
From: Dallas
Default

Hey fellas I can't seem to decide which brake pads to choose.. leaning towards maximum performance with the least amount of noise possible (Thanks Jake):b Got the 4/2 brembo setup, will be running Stoptech (power slot) slotted rotors in the front with cross-drilled/slotted in the back. I've used Hawk HPS pads and liked em but felt the braking distance degrade once they heated up. Currently leaning towards EBC red- or yellow- ..Can anyone who auto-x recommend some good pads? It would be much appreciated!
Reply
Old Nov 2, 2012 | 10:41 AM
  #27022  
AcidJake75's Avatar
AcidJake75
Living in 350Z
Premier Member
iTrader: (64)
 
Joined: Jan 2007
Posts: 4,887
Likes: 0
From: DFW, TX
Default

^^^Andy - glad youre on here holmes... Im sure Scott or Chris willl chime in...

on a side note - Cesars subframe bushings now say SIKKY on them now..

here is the aftermath...LMAO

Reply
Old Nov 2, 2012 | 10:42 AM
  #27023  
fithamoto's Avatar
fithamoto
Sleeps in 350Z
Premier Member
iTrader: (24)
 
Joined: Mar 2007
Posts: 5,745
Likes: 0
From: Flower Mound , TX
Default

Originally Posted by AndyBGAWTSuhZ
Hey fellas I can't seem to decide which brake pads to choose.. leaning towards maximum performance with the least amount of noise possible (Thanks Jake):b Got the 4/2 brembo setup, will be running Stoptech (power slot) slotted rotors in the front with cross-drilled/slotted in the back. I've used Hawk HPS pads and liked em but felt the braking distance degrade once they heated up. Currently leaning towards EBC red- or yellow- ..Can anyone who auto-x recommend some good pads? It would be much appreciated!
I have used The Hawk HPS, & EBC yellows....Currently I have the EBC blue pads on. EBC are much better !

Yellows will would be my recommendation if you DD your car...they will last longer. The blues seem to wear out quite a bit faster than the yellows.

I have gone thru a set of blues this year already....I think I might get the yellow's again next time because they worked great for Track & AutoX.
Reply
Old Nov 2, 2012 | 10:44 AM
  #27024  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,721
Likes: 9,296
From: Texas
Default

dang jake... that looks like it was a task
Reply
Old Nov 2, 2012 | 10:45 AM
  #27025  
AndyBGAWTSuhZ's Avatar
AndyBGAWTSuhZ
Registered User
iTrader: (15)
 
Joined: Dec 2010
Posts: 205
Likes: 0
From: Dallas
Default

-How long was the install Jake??

-That's just what I wanted to hear.. Yellow's seem like my best choice. Thanks Chris!
Reply
Old Nov 2, 2012 | 12:19 PM
  #27026  
mikes10's Avatar
mikes10
Registered User
 
Joined: Sep 2011
Posts: 850
Likes: 0
From: Plano, Texas
Default

outsiders? meh - they are everywhere -

is everyone done working on your car mr fith? bushing pressed in mr. bolton? are random people from the internet still showing up at your house jake?
Reply
Old Nov 2, 2012 | 12:26 PM
  #27027  
Lucky736's Avatar
Lucky736
New Member
10 Year Member
Liked
 
Joined: Jun 2011
Posts: 495
Likes: 4
From: SE MI & TX
Default

Lol. I'm not far and only met one person from here ever, that I know of. Lol.
Reply
Old Nov 2, 2012 | 12:42 PM
  #27028  
StuLax18's Avatar
StuLax18
General & Tech Moderator
MY350Z.COM
Premier Member
iTrader: (4)
 
Joined: May 2008
Posts: 48,548
Likes: 3,339
From: Jakku
Default

Who all have you met, and where?
Reply
Old Nov 2, 2012 | 12:43 PM
  #27029  
Lucky736's Avatar
Lucky736
New Member
10 Year Member
Liked
 
Joined: Jun 2011
Posts: 495
Likes: 4
From: SE MI & TX
Default

jdriftk, and that's it. Lol.
Reply
Old Nov 2, 2012 | 01:45 PM
  #27030  
mikes10's Avatar
mikes10
Registered User
 
Joined: Sep 2011
Posts: 850
Likes: 0
From: Plano, Texas
Default

stu!
Reply
Old Nov 2, 2012 | 04:27 PM
  #27031  
AllstarE4's Avatar
AllstarE4
Sleeps in 350Z
Premier Member
iTrader: (5)
 
Joined: Apr 2008
Posts: 3,244
Likes: 4
From: Fort Worth, TX
Default

Andy - I can't speak to EBC or Hawk, but I'm running the Stoptech Performance Street pads for autoX/track days/street. I haven't noticed any fade with them at all. I'm sure there are pads with more bite, quite possible the EBCs that Chris and Scott use, but I've yet to use those. There is no noise with the Stoptech and seemingly very little dust (although my car sees little to no street time these days).

Moral of the story - stoptech street performance pads are a viable option.
Reply
Old Nov 2, 2012 | 04:28 PM
  #27032  
StuLax18's Avatar
StuLax18
General & Tech Moderator
MY350Z.COM
Premier Member
iTrader: (4)
 
Joined: May 2008
Posts: 48,548
Likes: 3,339
From: Jakku
Default

Originally Posted by mikes10
stu!
Reply
Old Nov 3, 2012 | 02:12 PM
  #27033  
steidz's Avatar
steidz
Registered User
iTrader: (8)
 
Joined: Nov 2009
Posts: 758
Likes: 2
From: Hickory Creek, Tx
Default

Originally Posted by AndyBGAWTSuhZ
Hey fellas I can't seem to decide which brake pads to choose.. leaning towards maximum performance with the least amount of noise possible (Thanks Jake):b Got the 4/2 brembo setup, will be running Stoptech (power slot) slotted rotors in the front with cross-drilled/slotted in the back. I've used Hawk HPS pads and liked em but felt the braking distance degrade once they heated up. Currently leaning towards EBC red- or yellow- ..Can anyone who auto-x recommend some good pads? It would be much appreciated!
I like my ebc blues over the hawks. No noise and I have had them on for a year with 2 track days and many auto crosses. I know Chris didn't like the wear of his blues but they should wear longer the the yellows. Either way I think you'll like ebc.

Spec chart for ebc. http://www.ebcbrakes.com/selector.shtml

Last edited by steidz; Nov 3, 2012 at 02:15 PM.
Reply
Old Nov 3, 2012 | 02:55 PM
  #27034  
3hree5ive0ero's Avatar
3hree5ive0ero
Retired Admin
iTrader: (95)
 
Joined: Dec 2000
Posts: 1,337,017,813
Likes: 78
From: Dallas / Chicago
Default

Maybe I should give EBCs a try. I like the HP Plus so I'm already on my 3rd set, but it definitely is noisy almost all the time and dusts like a ****.
Reply
Old Nov 3, 2012 | 04:25 PM
  #27035  
AllstarE4's Avatar
AllstarE4
Sleeps in 350Z
Premier Member
iTrader: (5)
 
Joined: Apr 2008
Posts: 3,244
Likes: 4
From: Fort Worth, TX
Default

After driving Chris' car at autoX today I will say that his pads have much more bite than my Stoptech street pads. I don't have issues with mine, but his definitely have more bite. They would be too much for my tires, but he's got them paired with good grip so it works.
Reply
Old Nov 3, 2012 | 07:28 PM
  #27036  
AcidJake75's Avatar
AcidJake75
Living in 350Z
Premier Member
iTrader: (64)
 
Joined: Jan 2007
Posts: 4,887
Likes: 0
From: DFW, TX
Default

A bit sore today...Cesar is happy though, thats all that matters..







Reply
Old Nov 3, 2012 | 07:30 PM
  #27037  
AcidJake75's Avatar
AcidJake75
Living in 350Z
Premier Member
iTrader: (64)
 
Joined: Jan 2007
Posts: 4,887
Likes: 0
From: DFW, TX
Default

Ran into a ton of snags.. nothing brute strength and a BFH couldnt fix..

Thanks Patrick for helping us in final stretch....

Last edited by AcidJake75; Nov 3, 2012 at 07:40 PM.
Reply
Old Nov 3, 2012 | 08:41 PM
  #27038  
3hree5ive0ero's Avatar
3hree5ive0ero
Retired Admin
iTrader: (95)
 
Joined: Dec 2000
Posts: 1,337,017,813
Likes: 78
From: Dallas / Chicago
Default

^ I saw that beast mode last night, lol. Good for you guys for finally finishing up after a long day.

Originally Posted by AllstarE4
After driving Chris' car at autoX today I will say that his pads have much more bite than my Stoptech street pads. I don't have issues with mine, but his definitely have more bite. They would be too much for my tires, but he's got them paired with good grip so it works.
Yeah, driving each other's car at autox was pretty helpful today. I think it gave us more insight into our cars and a better idea of how to address its current set up issues. Congrats on placing podium, Eric!
Reply
Old Nov 4, 2012 | 04:48 AM
  #27039  
JaE35z's Avatar
JaE35z
New Member
iTrader: (11)
 
Joined: Jan 2011
Posts: 1,741
Likes: 1
From: DFW, TX
Default

oh man that looks like it was a ton of work
Reply
Old Nov 4, 2012 | 06:41 AM
  #27040  
boltup89's Avatar
boltup89
Registered User
iTrader: (2)
 
Joined: Dec 2008
Posts: 64
Likes: 1
From: Fort Worth
Default

Originally Posted by AcidJake75
Ran into a ton of snags.. nothing brute strength and a BFH couldnt fix..

Thanks Patrick for helping us in final stretch....
Big difference man, they are just what I needed. Really can't say it was smooth as butter, but the outcome is worth it to me...lol thanks Jake puta always gets through NO MATTER WHAT!! You need to drive my car bro to hurry you on getting yours on which have been sitting in your garage for how long? :P no pressure! Guess we ought to wait until we not sore anymore, dude my neck is still killing me today!
Reply



All times are GMT -8. The time now is 05:53 AM.