[DFW]: DFW's Lounge
02-20-2013, 04:21 PM
oh and i just checked my phone for the video setting.... it is set at qvga (very low res)... i prob set it that way to be able to send it via text.. my phone will do 1080p... will do next time
02-20-2013, 04:34 PM
the 06 had the revup motor right.... not quite the hr but no the de ..... right?
02-20-2013, 04:34 PM
02-20-2013, 04:40 PM
02-20-2013, 04:42 PM
Registered User
Join Date: Apr 2012
Location: Dalas,Tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
02-20-2013, 04:47 PM
02-20-2013, 04:56 PM
MyZisCarma..... what spring are you going with? you might want to consider camber kits front and rear so you dont have excessive camber wear
02-20-2013, 05:11 PM
02-20-2013, 05:39 PM
Registered User
Join Date: Apr 2012
Location: Dalas,Tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
02-20-2013, 05:42 PM
Registered User
Join Date: Apr 2012
Location: Dalas,Tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
02-20-2013, 05:48 PM
Registered User
Join Date: Apr 2012
Location: Dalas,Tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
well, what off set are you looking for and which spring are you putting on?? i would recommend (i beat myself up over wheels and offsets) trying to see if you can get someone to let you test fit wheels so you can see what they will look like. most people pn here run a 9.5 +15 on all )corners..... i however kept the staggered ... 9.5 +20 in rear and 9.0 +30 in the front..... i did add 5mm spacers on all fours... but you need to remember, it is your car do what you like/want
I kinda like the sttageres set up too I would consider 18x9.5 front and 18x10.5 rear or 19s kinda wanna go with the stance look but not hellaflish I just want flush
02-20-2013, 05:51 PM
Retired Admin
iTrader: (95)
Travis, just record in 720p. 1080p will only waste space. And for Z's, 05 Anniversary Edition and 06 Manuals got VQ35DE Revup engine -- still DE.
Lol..
I know it's not the same thing, but here's a video from 2009 on Cobb Plano's mustang dyno.
I was going to see if you were interested in my set, but guess not. 
Bad picture, but see attached.
Just in case you are, mine are 17x9.5 +17 front and 17x10 +17 rear with 245/40 and 275/40 tires, respectively. These are perfect for daily driving, with its slightly smaller diameter giving you slightly shorter gearing for quicker acceleration, extremely lightweight (compare to any 17"+ wheels), and no spacers required for the flush look.
Lol..
I know it's not the same thing, but here's a video from 2009 on Cobb Plano's mustang dyno.
Bad picture, but see attached.Just in case you are, mine are 17x9.5 +17 front and 17x10 +17 rear with 245/40 and 275/40 tires, respectively. These are perfect for daily driving, with its slightly smaller diameter giving you slightly shorter gearing for quicker acceleration, extremely lightweight (compare to any 17"+ wheels), and no spacers required for the flush look.
02-20-2013, 06:11 PM
Registered User
Join Date: Apr 2012
Location: Dalas,Tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Travis, just record in 720p. 1080p will only waste space. And for Z's, 05 Anniversary Edition and 06 Manuals got VQ35DE Revup engine -- still DE.
Lol..
I know it's not the same thing, but here's a video from 2009 on Cobb Plano's mustang dyno.
I was going to see if you were interested in my set, but guess not. Bad picture, but see attached.
Just in case you are, mine are 17x9.5 +17 front and 17x10 +17 rear with 245/40 and 275/40 tires, respectively. These are perfect for daily driving, with its slightly smaller diameter giving you slightly shorter gearing for quicker acceleration, extremely lightweight (compare to any 17"+ wheels), and no spacers required for the flush look.
Lol..
I know it's not the same thing, but here's a video from 2009 on Cobb Plano's mustang dyno.
I was going to see if you were interested in my set, but guess not.
Bad picture, but see attached.Just in case you are, mine are 17x9.5 +17 front and 17x10 +17 rear with 245/40 and 275/40 tires, respectively. These are perfect for daily driving, with its slightly smaller diameter giving you slightly shorter gearing for quicker acceleration, extremely lightweight (compare to any 17"+ wheels), and no spacers required for the flush look.
02-21-2013, 02:36 AM
me personally i would stay away from 19's..... on the 10.5 rear you would definately have to roll the fender or you would rub, with the 9.5 you dont always have to unless you run a big spacer. i am not dead set on selling mine yet but toying with the notion. after i finish all my dental work i will get back to spending money on the car. i am not sure where you are but you are welcome to meet me somewhere to see mine, and poss test fit on one side. also if i remember correctly the H&R springs are a 1.2" drop, i have the eibach prokits which is a 1" drop and depending on how much gas i have in the tank i have maybe one finger width gap between tire and fender... i think a 19" stuffed in there would look funny (my opinion though)
02-21-2013, 02:40 AM
02-21-2013, 05:29 AM
i might come into work for a bit sunday, i get so much more done when there is nobody here