[DFW]: DFW's Lounge
#3974
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
Dont know if these are "in-process" pics...if so, then cool, but if you just recently took these, then your jam nut has backed off and your barrel adjuster could have moved. SEE PIC.
-Jason
#3975
Living in 350Z
iTrader: (64)
-J, your not online.. where can I get spacers for my tie rods sir? any auto/hardware store?
https://my350z.com/forum/6576676-post2.html
Also I didnt do half steering stop cause I believe yours was rubbing...so I did a lil less than half..
https://my350z.com/forum/6576676-post2.html
Also I didnt do half steering stop cause I believe yours was rubbing...so I did a lil less than half..
#3976
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
SPACERS:
You can try a hardware store, but if you install those...you need to get an alignment again....
you can order them from SPL parts in Austin..they will sell you the spacers only..best you call..
STEERING STOPS:
It can still rub, the rubbing is due to aggressive offset wheels with wide rims....
You just gotta try wheels and check.....but for the wheels you have now, you will be fine..
I was rubbing running multiple wheel sizes with minimum 9 inch width wheels..i don't even know which wheel was doing it...lol...i guess the one with the shinny inner lip...lol..
-J
You can try a hardware store, but if you install those...you need to get an alignment again....
you can order them from SPL parts in Austin..they will sell you the spacers only..best you call..
STEERING STOPS:
It can still rub, the rubbing is due to aggressive offset wheels with wide rims....
You just gotta try wheels and check.....but for the wheels you have now, you will be fine..
I was rubbing running multiple wheel sizes with minimum 9 inch width wheels..i don't even know which wheel was doing it...lol...i guess the one with the shinny inner lip...lol..
-J
Last edited by JasonZ-YA; 03-17-2009 at 11:43 AM.