Notices
Tuning Reflashes, Piggybacks, Standalone ECUs

apexi neo

Old Dec 14, 2006 | 07:27 PM
  #1  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
New Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 444
Likes: 0
From: portland,oregon
Default apexi neo

ok i installed my intake and my catback exhaust and getting ready to put this bad boy on a dyno and tune with a apexi neo!!! my question is for the guys who have tuned with this .. where did u place this thing where it would not look tacky?????? i had a is300 hundred with similar mods and tuned with apexi super afc II . pulled 19 hp at 4500 rpms with it tuned right!!!! hopefully similar ganes but where do u put this thing at?? please post pics!!!!!!!!!!!!!!!
Reply
Old Dec 14, 2006 | 08:22 PM
  #2  
dTor's Avatar
dTor
New Member
iTrader: (27)
 
Joined: Jun 2006
Posts: 1,362
Likes: 0
From: Hattiesburg, MS
Default

I've got my Apexi RSM mounted on the upper left corner of my windshield. I used black, heavy duty double sided tape to mount it (using the optional stand) directly to the windshield and ran the cabling up to the headliner then down the driver's A-pillar. Because of the factory tint strip across the top of the windshield, the display cannot be seen from the outside of the car, not even the tape. It also remains out of your line of sight while driving, too.
Reply
Old Dec 14, 2006 | 08:50 PM
  #3  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
New Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 444
Likes: 0
From: portland,oregon
Default

do u have any pics????????
Reply
Old Dec 14, 2006 | 08:59 PM
  #4  
El Verdugo's Avatar
El Verdugo
New Member
 
Joined: Jul 2006
Posts: 620
Likes: 2
From: Kenner
Default

Post pictures sir.
Reply
Old Dec 15, 2006 | 05:22 AM
  #5  
dTor's Avatar
dTor
New Member
iTrader: (27)
 
Joined: Jun 2006
Posts: 1,362
Likes: 0
From: Hattiesburg, MS
Default

I'll see what I can do.
Reply
Old Dec 15, 2006 | 10:27 AM
  #6  
ofl0926's Avatar
ofl0926
Registered User
iTrader: (7)
 
Joined: Jun 2006
Posts: 569
Likes: 0
From: miami
Default

Originally Posted by neverbonestock
ok i installed my intake and my catback exhaust and getting ready to put this bad boy on a dyno and tune with a apexi neo!!! my question is for the guys who have tuned with this .. where did u place this thing where it would not look tacky?????? i had a is300 hundred with similar mods and tuned with apexi super afc II . pulled 19 hp at 4500 rpms with it tuned right!!!! hopefully similar ganes but where do u put this thing at?? please post pics!!!!!!!!!!!!!!!
if you have the chance, post your fine tune with this cause i have been looking for something to tune my car with but i dont want to spend the money on a utec.
Reply
Old Dec 16, 2006 | 12:02 AM
  #7  
rxkevin's Avatar
rxkevin
Registered User
iTrader: (66)
 
Joined: Jul 2004
Posts: 632
Likes: 0
From: Queens, New York
Default

Aren't the Neo's around 400 dollars? I would spend the extra money on the Utec. In the long run I think it is a far better investment.
Reply
Old Dec 17, 2006 | 11:00 PM
  #8  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
New Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 444
Likes: 0
From: portland,oregon
Default

hello any pics???? someone has to have pics !!!!!!!!!1
Reply
Old Dec 18, 2006 | 01:31 PM
  #9  
Chako135's Avatar
Chako135
Registered User
iTrader: (31)
 
Joined: Aug 2005
Posts: 690
Likes: 1
From: South Florida
Default

Originally Posted by rxkevin
Aren't the Neo's around 400 dollars? I would spend the extra money on the Utec. In the long run I think it is a far better investment.
I agree - that's exactly what im planning in the near future...
Reply
Old Dec 19, 2006 | 08:45 AM
  #10  
dTor's Avatar
dTor
New Member
iTrader: (27)
 
Joined: Jun 2006
Posts: 1,362
Likes: 0
From: Hattiesburg, MS
Default

Here's a pic from my camera phone.
Attached Thumbnails apexi neo-meter.jpg  
Reply
Old Dec 19, 2006 | 05:35 PM
  #11  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
New Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 444
Likes: 0
From: portland,oregon
Default

depending on the mods u have the neo is the way to go for slight mods! if u go fi then utec, but it is a piggyback like the neo !!!
Reply
Old Dec 20, 2006 | 04:29 AM
  #12  
El Verdugo's Avatar
El Verdugo
New Member
 
Joined: Jul 2006
Posts: 620
Likes: 2
From: Kenner
Default

Originally Posted by neverbonestock
depending on the mods u have the neo is the way to go for slight mods! if u go fi then utec, but it is a piggyback like the neo !!!
Its(UTEC) a little more robust of a piggyback than a NEO that is for sure.
That is why it merits a higher price tag.
Reply
Old Dec 20, 2006 | 12:24 PM
  #13  
RA11325's Avatar
RA11325
Banned
iTrader: (9)
 
Joined: Jul 2003
Posts: 1,918
Likes: 0
Default

Watched my friends 240sx get tuned today using a neo, very cool device, he picked up 18whp!
Reply
Old Dec 26, 2006 | 12:53 PM
  #14  
ramega4's Avatar
ramega4
Registered User
iTrader: (2)
 
Joined: Sep 2005
Posts: 185
Likes: 0
From: New jersey
Default

Hey maybe you guys can help me out i have an intake and exhaust. I just ordered a nitrous kit and im thinking of getting test pipes and a plenum spacer. Can i use a safc neo well with these mods and how will it effect the nitrous kit with a window switch.
Reply
Old Dec 27, 2006 | 01:29 AM
  #15  
Audible Mayhem's Avatar
Audible Mayhem
My350z
iTrader: (48)
 
Joined: Oct 2005
Posts: 5,165
Likes: 3
From: United States
Default

i just tuned a Z with a afc neo on it, we got about 8 more hp total out of it, i was VERY surprised. its set up pretty ghetto though and i wouldnt recommend it really, but the guy already had it installed so i messed with it.

he had it in two previous cars...

it wont effect any thing with the nitrous, they are pretty much two seperate things because the fuel is controlled on the nitrous with jets so doesnt effect the AFR of what you have set up all the time..
Reply
Old Jan 2, 2007 | 10:10 PM
  #16  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
New Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 444
Likes: 0
From: portland,oregon
Default

any pics of ur friends set up of the neo??
Reply
Old Jan 3, 2007 | 05:18 PM
  #17  
Audible Mayhem's Avatar
Audible Mayhem
My350z
iTrader: (48)
 
Joined: Oct 2005
Posts: 5,165
Likes: 3
From: United States
Default

nope sorry, it was just sitting in the cubby hole...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dr.Paulyy
Maintenance & Repair
12
Jul 29, 2019 07:45 AM
TXSTYLE
Wheels & Tires
12
Mar 31, 2006 04:48 PM
valuetl
Engine & Drivetrain
4
Mar 28, 2003 05:45 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:46 PM.