I have a TXS Tuner Pro and need the part # for the Bosch o2 sensor. I ordered one from turbo xs and the clip is wrong. The part # they gave me is 17014. Both clips are 6 pin. The cable I have is 6 pins in a row 17014 is 3 on top of 3.
Any help would be great.

 

just cut them and make your own clip. match up the color wires to the same.

their might be one odd color that you will need to put together.

the single 6 in a row one is becoming hard to find...

 

I talked to turbo xs today. They said the 6 pin was discontinued 6 months ago. For anyone buying a used tuner pro make sure the cable is for the VW bosch sensor it's the 3 on top of 3 pin, or you will have to spend $99 for a new cable to upgrade it along with the $72 bosch #17014 o2 sensor. Don't try to make it work buy rigging, cutting and so on.

 

Do you mind that if I have the tuner kit with the VW wideband I can use that bosch O2 sensor, with the reference 17014? that's good to know in the event that my VW O2 wideband damages