Official Split Second FTC Thread
Official Split Second FTC Thread
Hey guys I wanted to start this so everyone will know to stay away from this piggy back. So far here has been my eperience with it.
Stock Map: Super rich towards top end (about 10 to 1)
MRC Tune: MRC Tuned the car for air/fuel of about 12-11.5 to 1. Air/Fuel went super lean sometime after the tune (about 17 to 1)
Altered Atmosphere: AAM tuned the car after installing fuel return system, bigger injectors, ECU Reflash, and fuel pump. Car is currently running about 9.5 to 1 as soon as I go above 4 psi.
Everyone tuner I have talked to hates it do to lack of functionality and user friendliness.
Hopefully others will either back me up on this or have other things that sucked about it. I hope anyone planning on going forced induction or still using this POS will get rid of it as soon as possible.
Stock Map: Super rich towards top end (about 10 to 1)
MRC Tune: MRC Tuned the car for air/fuel of about 12-11.5 to 1. Air/Fuel went super lean sometime after the tune (about 17 to 1)
Altered Atmosphere: AAM tuned the car after installing fuel return system, bigger injectors, ECU Reflash, and fuel pump. Car is currently running about 9.5 to 1 as soon as I go above 4 psi.
Everyone tuner I have talked to hates it do to lack of functionality and user friendliness.
Hopefully others will either back me up on this or have other things that sucked about it. I hope anyone planning on going forced induction or still using this POS will get rid of it as soon as possible.
Not sure why you would even consider running this.
And this isn't just towards you. I don't get why people spend so much money on FI systems for our cars and use a shitty EMS with it.
And this isn't just towards you. I don't get why people spend so much money on FI systems for our cars and use a shitty EMS with it.
*****i have 40,000 miles on my car with a supercharger and splitsecond box and have done all of the tuning myself. I NEVER HADE ONE PROBLEM WITH IT. if you ask me it works just fine.***
Last edited by OldManZ350; Jun 6, 2015 at 06:49 PM.
LOL
SpiltSecond is ...IMPO...is much less hassle and trouble than alot of other piggybacks . I had 550 injectors . return fuel and running 20psi . Self tuned up to 16psi [ as far as the SS box will go ] with no prroblems at all .
SpiltSecond is ...IMPO...is much less hassle and trouble than alot of other piggybacks . I had 550 injectors . return fuel and running 20psi . Self tuned up to 16psi [ as far as the SS box will go ] with no prroblems at all .
Registered User
Joined: Mar 2009
Posts: 3
Likes: 0
From: manila, philippines
hi guys,
need help regarding installation of splitsecond to my ecu. We have already attached the wiring of the split second to the stock ecu, but all wires are correct except with the MaF sensor, we still do not get the reading to our laptop. what might be wrong and what we should do? Im from the philippines, we just installed a turbonetics single turbo kit in 2006 nissan 350z. hoping for favorable responses. thanks
need help regarding installation of splitsecond to my ecu. We have already attached the wiring of the split second to the stock ecu, but all wires are correct except with the MaF sensor, we still do not get the reading to our laptop. what might be wrong and what we should do? Im from the philippines, we just installed a turbonetics single turbo kit in 2006 nissan 350z. hoping for favorable responses. thanks
Registered User
Joined: Mar 2009
Posts: 3
Likes: 0
From: manila, philippines
hi guys,
need help regarding installation of splitsecond to my ecu. We have already attached the wiring of the split second to the stock ecu, but all wires are correct except with the MaF sensor, we still do not get the reading to our laptop. what might be wrong and what we should do? Im from the philippines, we just installed a turbonetics single turbo kit in 2006 nissan 350z. hoping for favorable responses. thanks
need help regarding installation of splitsecond to my ecu. We have already attached the wiring of the split second to the stock ecu, but all wires are correct except with the MaF sensor, we still do not get the reading to our laptop. what might be wrong and what we should do? Im from the philippines, we just installed a turbonetics single turbo kit in 2006 nissan 350z. hoping for favorable responses. thanks
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
Tochigi_236
Feedback & Suggestions for Our Forum
8
Sep 27, 2015 03:40 PM
