Anyone here used Cipher on a revup?
Just curious if any of you have logged the exhaust cam timing. I need to know what the behavior is at idle, part throttle cruising, and WOT. Thanks in advance to anyone who can help.
And yes I've searched...
And yes I've searched...
Thanks for the reply. Do you still have those logs available to you? I'm curious as to what the sweep of the retarders is and when it does what. Anything you can get me would be greatly appreciated.
6.1.1. Using Cipher please log the following parameters:
1. AFR (Make sure your ECU is set up in the wide band conversion. See Cipher user guide)
2. Accelerator position (either one)
3. Base fuel schedule
4. Calculated load
5. Coolant temp
6. Engine speed (RPM)
7. Ignition timing advance
8. Injector Pulse Width (either one)
9. Throttle position (either one)
1. AFR (Make sure your ECU is set up in the wide band conversion. See Cipher user guide)
2. Accelerator position (either one)
3. Base fuel schedule
4. Calculated load
5. Coolant temp
6. Engine speed (RPM)
7. Ignition timing advance
8. Injector Pulse Width (either one)
9. Throttle position (either one)
Trending Topics
Originally Posted by cdoxp800
6.1.1. Using Cipher please log the following parameters:
1. AFR (Make sure your ECU is set up in the wide band conversion. See Cipher user guide)
2. Accelerator position (either one)
3. Base fuel schedule
4. Calculated load
5. Coolant temp
6. Engine speed (RPM)
7. Ignition timing advance
8. Injector Pulse Width (either one)
9. Throttle position (either one)
1. AFR (Make sure your ECU is set up in the wide band conversion. See Cipher user guide)
2. Accelerator position (either one)
3. Base fuel schedule
4. Calculated load
5. Coolant temp
6. Engine speed (RPM)
7. Ignition timing advance
8. Injector Pulse Width (either one)
9. Throttle position (either one)
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




