NEW Intake Manifold for VQ35HR!!
#271
Registered User
iTrader: (6)
Join Date: Jan 2007
Location: DeLand, Florida
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure?
Per Forged Performances tear down I see round ports (mostly), with flat top and bottoms, and the top is opened up for the fuel injector (it appears)
I think its just square runners so they could fit them closer together in the intake manifold by the throttle bodies.
Per Forged Performances tear down I see round ports (mostly), with flat top and bottoms, and the top is opened up for the fuel injector (it appears)
I think its just square runners so they could fit them closer together in the intake manifold by the throttle bodies.
#272
Professional
iTrader: (13)
Join Date: Jun 2005
Location: Flower Mound, TX
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Yea the upper plenum to lower runners is square. The GTR engine is not that different in shape from any other HR engine. If we could only see if a GTR intake would fit.... how cool would the looK ! The 3.8 is from longer stroke and it might only be a slight difference in head port shape.
#273
New Member
iTrader: (2)
Yea the upper plenum to lower runners is square. The GTR engine is not that different in shape from any other HR engine. If we could only see if a GTR intake would fit.... how cool would the looK ! The 3.8 is from longer stroke and it might only be a slight difference in head port shape.
EDIT: Here is the thread. Start from post #7.
https://my350z.com/forum/vq35hr/4072...-manifold.html
Last edited by KS0385; 03-25-2009 at 07:33 AM.
#277
Registered User
iTrader: (5)
Join Date: Nov 2006
Location: Seattle (area), WA
Posts: 2,921
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure?
Per Forged Performances tear down I see round ports (mostly), with flat top and bottoms, and the top is opened up for the fuel injector (it appears)
[IMG]http://www.forgedperformance.com/media/pics/DSC_4565.JPG[IMG]
I think its just square runners so they could fit them closer together in the intake manifold by the throttle bodies.
Per Forged Performances tear down I see round ports (mostly), with flat top and bottoms, and the top is opened up for the fuel injector (it appears)
[IMG]http://www.forgedperformance.com/media/pics/DSC_4565.JPG[IMG]
I think its just square runners so they could fit them closer together in the intake manifold by the throttle bodies.
#278
Registered User
Join Date: Feb 2009
Location: Detroit, MI
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Our current design will replace the upper manifold. It will bolt to the lower manifold which is pictured above. There are plans for a manifold that will replace both upper and lower manifolds which will bolt directly to the cylinder heads but we have not even started to design it yet.
#280
Registered User
Join Date: Feb 2009
Location: Detroit, MI
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Because the picture on our website is of an aluminum manifold for a VQ35DE. The stainless steel manifold for the DE motor (which we do sell) looks exactly like that except that it has more of a polished look. If there was no picture at all then you would be saying "how can they sell something without a picture?".