bluelineshooter

Get VOLKS!

AngelsVQ

iTrader: (4)

Keep that money, save a bit more. Buy some nice real rims from the marketplace. Those plain look nasty. And as far as the previous comment about you needing 19 or 20s ignor that. Look around the galleries there are plenty of pics of 18 19 and 20 for you to see how they look. I personally like 18. Around +20 should be fine depending on the with.

But yea check the market place man!

davidv

iTrader: (2)

Never mind. I thought this was important. Important enough to say “thanks” or simply reply.

ZS14RR

iTrader: (30)

If you're looking to spend 3500 for used authentic wheels and tires go ahead. If not varrstoen and XXR make some nice wheels for cheap. From the looks of it you might like the XXR 521s. They offer better sizing.

psychoballistic

iTrader: (8)

Are most of you 285/35/18 and 295/35/18 guys on stock suspensions with just fender rolls or are most running a spring/ suspension setup... Liking the works and rpf1s and can't tell on most what your all running for suspension, any info would be appreciated, thanks all.

P.s sorry to hijack the thad.

Zivman

iTrader: (19)

you can EASILY run 295's without rolling fenders. Just buy the right offsets. I have 295's on a 10.5" wheel. Just stick to around a +28 on a 10.5" (or comparable offset) and you will be fine. I am lowered on coils and have no issues with anything

Apocalyps3

+1, anyone know what wheels these are?

Zivman

iTrader: (19)

they are weds sa70 wheels. I believe they are discontinued.

ZSilverBullet28

Anyone know what skirts these are?

leykias

iTrader: (8)

^ veilside

Stock2Autocrozz

iTrader: (6)

Can anyone advise please, have my 18x9.5"+20's
Ready to pull trigger on square setup, stock susp still.....thinking 255/45/18 or 265/35/18's also in same range.
Any reason to not run a 45 aspect?
Thanks guys, buying tomorrow hopefully

BrandonHeat

iTrader: (1)

Lmgt4

3hree5ive0ero

iTrader: (95)

255/45s would be bigger in overall diameter whereas the 265/35s would be shorter in overall diameter. Choosing between the two should be personal preference, or at least depend on your local autox course layouts.

Stock2Autocrozz

iTrader: (6)

^lol, yeah I get the formulation....I was wondering if anyone had run/experience w either setup, or reason to avoid higher aspect like 45?

kyle350

what is the offset on your rims? and what brand?

mr. sparco

iTrader: (13)

^ You have an emoticon blasting "Ricer" yet you don't recognize Work VS-KFs?

kyle350

wow dont make yourself look dumb... do you just go out of your way to try and **** people off? i like how people say stuff of the internet like their the biggest dude ever but nobody ever says anyting in person

mr. sparco

iTrader: (13)

My bad, I was just questioning the term "rice" no personal foul intended. I didn't think you would be so sensitive to my comment. Next time I will try to be more careful with my choice words as to not hurt your feelings. And yes, your example is spot on as it can be applied universally whenever someone posts something online that you feel is an attack. Once again I should have been more warm fuzzy for some of our more "fragile" members. I want to apologize to the 350z community for my harsh comment and hurtful words.

Thank you.
....................
Calm down my friend it's the interwebs I've learned to have thicker skin when online.

ronn1

iTrader: (1)

If I have another thread on my rims, can I also post pics of them here (18")?
I don't want to merge that thread over here though, since very few people come visit this thread.
Thanks in advance....

theianmcdougall

iTrader: (1)

work vskf

18x9.5+7
18x10+7

sold those a while back