venture210

That stretch is ridiculous. One day that bead is going to slip off and then it kinda goes downhill from there

Cjw4050

iTrader: (8)

well luckily i wont be running this retarded of a stretch, this was just a test fit

ill be running a 265 up front, 265 on an 11" isn't that bad. definitely not like this.

MOTOcitiRidr

just bought some Cosmis MRII 18x9.5 +15 offsets they came with square with 245-40's. can i use and does anyone use 275/40 on the rear. id like to fill the rear well a tad more.

im also at stock height.

terrasmak

iTrader: (8)

It will work fine if you read anything

avoiee

Hi again

as before i mentioned new to Z land , i read quiet a lot on F 18x10 -3 R 18x12 - 20 and there is no way i am going to make it work as i need without heavy mods to fenders flares painting and all that stuff. so i'll have to sell Meisters

Now i have two options and would like to know your opinion on these ones

option 1

SSR AGLE Premium (sp1 look like) , specs are F - 18x10 + 19 , R - 18x10 + 11 , how flush they will sit ? planing to run 265/35 all around ? or i will need some 10MM spacers to fill up fenders ? front lip is kinda small for me



option 2

SSR SP1 , specs are : 18x9.5 + 5 , 18x11 - 1

i know fronts will fit just nice , but what about rears? i've seen u guys run 18x10.5 + 15 with 15mm spacers that makes 0 offset , so 18x11-1 with rolled fenders and really little campber play should be ok for me?



sp1-s are 1300$ more expensive than AGLE premiums , both are forged , but sp1 looks more aggressive and wait time is going to be 3-4 months from Japan , and this is the worst part for me

or i just should order knock of varrstoen es6 18x10.5 + 15 all around and get them in 2 weeks time and will cost me 1350$ landed to my door which is same price as SSR AGLE as mentioned and pictured up in the post

forgot to mention car has factory brembo calipers

Cjw4050

iTrader: (8)

So...

I bought these enkei rs05rr's

They're 18x11 +16 all the way around

I'm running 265/35 up front
And 285/35 in the rear

There's no way I could get enough front camber with stock camber arms for these to sit right ?
I had to put a 5/16 spacer up front because it was barely rubbing on the upper control arm.

Would a 18x10 +22 on a 265/35 fit a lot better?

Or should I go down to a 9.5?

radiocrash

iTrader: (3)

with stock camber arms i doubt you'll be able to run enough camber to "fix" that. it looks pretty mexiflush at the moment.

bmccann101

iTrader: (16)

fender flares or new wheels.

350zjason350z

iTrader: (15)

More pics ... Those are dope rims tho

AdvanZ33

iTrader: (105)

18x10+22 gets my vote.

Cjw4050

iTrader: (8)

Judging by my coilover height, would that be a problem with a 265 tire ?

pyshin

iTrader: (14)

18x10 +22 would work.

No way you're getting that to with with stock FUCA's.

Junkster

iTrader: (3)

I am running 18x10.5 +15 fronts on 265 35's on stock arms and they fit perfectly.

Just to help put into perspective...

Cjw4050

iTrader: (8)

Are you lowered?

Junkster

iTrader: (3)

Yea im pretty much bottomed out on my coilovers.

I guess you could say im "slammed" brah jdm tyte style lol

Junkster

iTrader: (3)

After making the investment on your wheels why not just spend a bit more on FUCA's and add some camber to fit your current setup?

I guess we should ask what your main objective with the car is first though.

Cjw4050

iTrader: (8)

Are spc's good? I don't want to be running ridiculous camber up front and having the rears straight, I feel like that would look dumb. How hard is a Fuca install?

dcains

iTrader: (15)

Why don't guys just buy the right parts in the first place, instead of trying to adapt/rig the wrong ones? I just don't get it.

Cjw4050

iTrader: (8)

because i bought these off my friend and got a good deal, they seemed like they fit fine when i tested them, but they were stretched on a 235 tire.. im running 265's now

Should i just purchase new fronts or just buy FUCA's

Are FUCA's the only part i'll need to run these?

Cjw4050

iTrader: (8)

the rim not the tire is rubbing on the part that is boxed in on the picture



so im guessing i need to run about a 1/4" spacer

how much negative camber would that be?