Notices
Wheels & Tires 350Z Rollers and Rubbers

550+whp...what wheel/tire combo would you recommend?

Old Jul 9, 2005 | 06:09 PM
  #1  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default 550+whp...what wheel/tire combo would you recommend?

I know next to nothing about tires and would like somebody to tell me what they would pick if they were in my shoes. I've searched, but I want to know what you guys think too.

I'm thinking maybe 19x10.5 wheels with 305/35/19's in the rear, what do you think? I may have to cut the wheel wells but I'm fine with that.
Reply
Old Jul 9, 2005 | 06:13 PM
  #2  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default 550+whp....what wheel/tire combo would you recommend?

I posted this already in the wheel/tire section, but since some of you FI guys may not look there I thought I'd post it in here as well.

I know next to nothing about tires and would like somebody to tell me what they would pick if they were in my shoes. I've searched, but I want to know what you guys think too.

I'm thinking maybe 19x10.5 wheels with 305/35/19's in the rear, what do you think? I may have to cut the wheel wells but I'm fine with that.
Reply
Old Jul 9, 2005 | 06:18 PM
  #3  
EdgeOfSanity's Avatar
EdgeOfSanity
Registered User
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,101
Likes: 1
From: Breckenridge, Co
Default

definetly roll the fenders and put the widest tires you can without rubbing.
Reply
Old Jul 9, 2005 | 06:22 PM
  #4  
Brandon@Forged's Avatar
Brandon@Forged
Sponsor
Forged Internals.com
 
Joined: May 2003
Posts: 5,566
Likes: 1
From: Valdosta, GA
Default

You'll probably have to roll the fenders. Should fit fine though (as far as the wheel and tire combo).
Reply
Old Jul 9, 2005 | 06:26 PM
  #5  
Zivman's Avatar
Zivman
New Member
iTrader: (19)
 
Joined: Jun 2003
Posts: 7,179
Likes: 27
From: MPLS/ST.Paul MN
Default

Originally Posted by ccartwright
I posted this already in the wheel/tire section, but since some of you FI guys may not look there I thought I'd post it in here as well.

I know next to nothing about tires and would like somebody to tell me what they would pick if they were in my shoes. I've searched, but I want to know what you guys think too.

I'm thinking maybe 19x10.5 wheels with 305/35/19's in the rear, what do you think? I may have to cut the wheel wells but I'm fine with that.
Have you ever seen 19s in person on the Z? I think they look like wagon wheels, much too large for my taste. With the right wheels, they can look good, but choose your wheels wisely.

With a 10.5 wheel, a 305 might be a bit "pillowy" on the side wall. I run a 295 on a 10.5 and there is plenty of bulge on the sidewall, I think a 305 might be a bit much. You most likely will have to roll fenders in order for them to fit.

I say run an 18X10 or 10.5 in the rear with a nice soft tire.
Reply
Old Jul 9, 2005 | 06:37 PM
  #6  
Zivman's Avatar
Zivman
New Member
iTrader: (19)
 
Joined: Jun 2003
Posts: 7,179
Likes: 27
From: MPLS/ST.Paul MN
Default

forgot to add that there are more/better tire choices in 18s than 19s
Reply
Old Jul 9, 2005 | 09:32 PM
  #7  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default

Can you elaborate some on rolling the fenders?
Reply
Old Jul 9, 2005 | 09:35 PM
  #8  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default

What are your thoughts about getting 18's all around and running 305 DR's all the time? I just want to get something and stick with it, not have a set of rears for looks and one for traction, ya know?
Reply
Old Jul 9, 2005 | 09:38 PM
  #9  
Chad68's Avatar
Chad68
Registered User
iTrader: (1)
 
Joined: Apr 2005
Posts: 3,171
Likes: 2
From: CA
Default

Originally Posted by ccartwright
I know next to nothing about tires and would like somebody to tell me what they would pick if they were in my shoes. I've searched, but I want to know what you guys think too.

I'm thinking maybe 19x10.5 wheels with 305/35/19's in the rear, what do you think? I may have to cut the wheel wells but I'm fine with that.

That's what I would use, except I would use a 30 series tire on a 19x10.5" wheel otherwise your sidewalls will look huge (imo) and the larger dia. will fool your computer and trip the whatever the heck that light is that goes on when your tire sizes are off by too much from stock.

Like the other guy said, use the widest you can with that much HP.
Reply
Old Jul 9, 2005 | 09:50 PM
  #10  
cloudy's Avatar
cloudy
Registered User
iTrader: (3)
 
Joined: Aug 2004
Posts: 1,413
Likes: 1
From: Arizona
Default

What do you want, to perform a little better or look a little better? Perform = 18, Look = 19 obviously.. 305 i think is too much and will for SURE have to roll the fenders. With 295s you will have to roll them as well to look good.
Reply
Old Jul 9, 2005 | 10:27 PM
  #11  
illZ's Avatar
illZ
Registered User
 
Joined: Apr 2005
Posts: 455
Likes: 0
From: New Castle PA
Default

Originally Posted by ccartwright
Can you elaborate some on rolling the fenders?
http://www.eastwoodco.com/shopping/p...rd=roll+fender
Reply
Old Jul 9, 2005 | 10:39 PM
  #12  
mchapman's Avatar
mchapman
Registered User
iTrader: (1)
 
Joined: Jan 2004
Posts: 1,979
Likes: 1
Default

You wouldnt be able to feel the performance difference from 18" to 19" but you would be able to see the difference.

If you get the right 19s they can be lighter than stock.
Reply
Old Jul 9, 2005 | 11:29 PM
  #13  
mrtomcat's Avatar
mrtomcat
Registered User
iTrader: (3)
 
Joined: Nov 2004
Posts: 2,697
Likes: 0
From: Studio City, CA
Default

Originally Posted by ccartwright
What are your thoughts about getting 18's all around and running 305 DR's all the time? I just want to get something and stick with it, not have a set of rears for looks and one for traction, ya know?
not for everyday driving...I would most likely still have my 2004 Track if I wouldn't have run DR's in the back during the rain...
Track - yes
street - NO
Reply
Old Jul 10, 2005 | 02:13 AM
  #14  
sentry65's Avatar
sentry65
the burninator
Premier Member
iTrader: (11)
 
Joined: Mar 2004
Posts: 9,722
Likes: 2
From: phoenix, AZ
Default

Originally Posted by mchapman
You wouldnt be able to feel the performance difference from 18" to 19" but you would be able to see the difference.

If you get the right 19s they can be lighter than stock.

it isn't all about just weight, it's the diameter of the wheel and how the weight being distributed around a greater diameter taking more force to turn the wheel

meaning an 18" 20 lb wheel will outperform a 19" 20 lb wheel
Reply
Old Jul 10, 2005 | 02:37 AM
  #15  
Triple8Sol's Avatar
Triple8Sol
Banned
iTrader: (218)
 
Joined: Aug 2004
Posts: 4,874
Likes: 0
From: Seattle, WA
Default

You still wanna stay in spec. I second that you should go with a 30 profile. Go check the wheel/tire calculator
Reply
Old Jul 10, 2005 | 03:56 AM
  #16  
kudos's Avatar
kudos
Registered User
 
Joined: Feb 2003
Posts: 154
Likes: 0
From: Doha, Qatar
Default

Originally Posted by sentry65

meaning an 18" 20 lb wheel will outperform a 19" 20 lb wheel
On a 160whp civic, but i doubt it would be noticable in 500whp Z.
Reply
Old Jul 10, 2005 | 08:28 AM
  #17  
amolaver's Avatar
amolaver
Registered User
iTrader: (1)
 
Joined: Feb 2003
Posts: 432
Likes: 0
From: VA
Default

i think the first question is what are you doing with the car? street racing and street driven 100%? real 1/4 mile runs? DE's on real racetracks? wheels and tires from a number of vendors are marketed for each of those niches (among others), and each serves a purpose. what are you doing with the car?

ahm
Reply
Old Jul 10, 2005 | 08:45 AM
  #18  
350zDCalb's Avatar
350zDCalb
Sponsor
builtZmotors
iTrader: (21)
 
Joined: Jul 2004
Posts: 2,780
Likes: 0
From: Albuquerque, NM
Default

I have volk gtcs...
front: 9.5 245/35/19
rear 10.5 285/35/19 (plenty of room for more tire, will go 295/305 next time-fenders are rolled as well)
19's look soooooo good...i'm sure 18's look good as well, 19's are not overkill!!!
the car looks so much more aggressive with the big rubber hanging out, the best way to describe it is...before, the car looked like a dalmation ...now it sits like a pit bull
will receive on tues: set of 18 by 9.5 w/ 295/35/18 bf drag radials

just sharing....
Reply
Old Jul 10, 2005 | 10:45 AM
  #19  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default

Performance first, looks second, but I don't want to be swapping out rear wheels all the time either, so I basically just want the widest 19" tire I can fit in the rear. Who makes a good 19" 305, and what size wheel would I want to go with it?
Reply
Old Jul 10, 2005 | 10:55 AM
  #20  
failsafe306's Avatar
failsafe306
Thread Starter
Registered User
iTrader: (38)
 
Joined: Mar 2005
Posts: 7,040
Likes: 1
From: OK
Default

Thanks guys
Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:47 AM.