r.c.y.k.

iTrader: (1)

Mine


I have notice that the te37s or le37s i have seen on other Zs have a more concave look.


Anyone know the answer?? is it becoz of offset?? size??

SickG35

iTrader: (6)

most likely is the offset. What sizes and offsets do you have?

tulene

yep i got the exact same as you. 9.5 rears 34 offset i believe. prefer the cnocave look but couldnt wait 3 months at the time. 10.5's will give you the concave

aznmojo

isnt it like a different "face" type. The difference is heaven and hell.

sentry65

iTrader: (11)

it's the offset and wheel size

18's will look more concave than 19's

lower offset will look more concave than higher offset

ssc

iTrader: (1)

the DB Z most likly has 19x10.5 +22 in the rears....you dont...you prolly have like 19x9.5+34

vipv35

the le37s are the same as the te37s except they come in different offsets so there is a deeper lip. it is the same thing for the ce28s and the le28s.

1nate7

iTrader: (19)

The width and offset determine the amount of lip and concave spokes. You have the most conservative set-up on both offset and width judging by how your wheels are tucked in. If you look at the blue Z you will see that the wheels are more flush with the fender. You need a +22 offset to get the concave spokes - 8.5" (almost no lip), 9.5" (small lip), and 10.5" (~2" lip). The LE's have a polished lip and that is the only difference from the TE's.

Steve@Evolution

iTrader: (3)

That's why on LE and TE, I only sell 9.5 +22 and 10.5 +22.

Steve - Evolution
703-961-9090

sokudo9l6

iTrader: (2)

but will the 10.5 fit in the rear without rolling the fenders?

Steve@Evolution

iTrader: (3)

Won't rub if you run 275 in the rear with tires that don't have thick wheels protectors.

Steve - Evolution
703-961-9090