I am considering buying a set of PIAA's Super Rozza wheels fronts are 19 x 9.5" and the rears are 19 X 10.5" they say the specs are as follows

The two 9.5" wheels have a pattern and offset of 5x114.3+20mm (offset was taken from a website). The two 10.5" wheels have a pattern of 5x114.3. The offset is believed to be 30mm, but other sources have advised it is 35mm. They were mounted on a 350Z and fit perfectly until the aftermarket brakes were put on (StopTechs - the 14" rotors were too large for the rear wheels to fit over, which is why they were not used). Please check with your dealer to make certain that it will fit your vehicle.

will the rear 19 x 10.5" fit without rolling the fenders?
Are the offsets correct?

Thanks guys!!

 

My friend on here has that same setup. However it is on a G35 which should be close too if not the exact same size and fitment issues. PM him his screen name is anotherg35

That way you can find out his offset.

 

I was considering those wheels for a while. Every time I got a quote, the size application for the Z was 9.0" front and 10.0" rear.

I could be wrong, or there could be multiple fitments available. Just a heads up.

 

thanks for your help guys. I will definetly look into before buying.

 

Are those the eBay ones? I was just looking at 'em today

http://cgi.ebay.com/ebaymotors/19-Pi...spagenameZWDVW

 

yes