Work Wheels Thread
#1224
Work Emotion CR Kiwami
OKokok, I know I've been asking a lot of questions about Enkie RPF1's, but ....Work has now caught my eye. Particularly Work Emotion CR Kiwami's Car is a 06' Base, stock..everything (fer now), it is DD'd and used for canyon runs, will continue to be, but also will be AutoX'd. It will at some point get coil overs, and it will at some point get bigger brakes (so brake fitment, is important). I was thinking either 18x9.5's all around, or 9.5's in front, 10.5's in back. Question is, offsets? What will fit under a stock car (and future coil overs) while also fitting over future big brakes? 9.5 could be +12 +20 +30 or +38, and 10.5's only seem to come in + 23. As far as tires, I'm thinking they will be Michelin Pilot SS's, 275/35/18 on 9.5's or maybe 275/40?? 295/35/18 on 10.5's if staggering ? Opinions, thoughts, ideas please
Almighty Mod's feel free to place this as a reply to a forum if there is one it would fit under, if need be.
Almighty Mod's feel free to place this as a reply to a forum if there is one it would fit under, if need be.
#1226
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC
18x10.5 comes in +15 as well:
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
#1227
18x10.5 comes in +15 as well:
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
Last edited by itchy213; 04-21-2014 at 03:39 PM.
#1228
Yes, why not. Look at this picture
(and others of the same photoset), blue Z has 9.5 +20 all around, yeah there are not CR Kiwami they are Rota Tourque but now you can imagine how it will look.
Last edited by SerG35ei; 04-22-2014 at 12:02 PM.
#1229
Yes, why not. Look at this picture IMG_7273 | Flickr - Photo Sharing!@@AMEREPLACE@@ (and others of the same photoset), blue Z has 9.5 +20 all around, yeah there are not CR Kiwami they are Rota Tourque but now you can imagine how it will look.
#1231
Looks great!! Here's the pic you requested
18x9.5 +20 going with 275/35/1
18x10.5 +22 going with 295/35/18
Tires are ordered and on their way!
Last edited by RacingBlack350Z; 04-25-2014 at 07:21 AM.
#1233
#1236
#1237
i tried posting in the aggressive wheels thread but no help there...
do you guys know what the smallest spacer i can run on my r disk vsxx 18x10 +6 in order to clear the front akebonos?
do you guys know what the smallest spacer i can run on my r disk vsxx 18x10 +6 in order to clear the front akebonos?
#1240
\