When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you get super low disk all around? The ones in the pic looks to be a lot more aggressive than the specs you posted.
Edit: NM Box reads 19x11.5 -11.
Oh I just took a pic and photoshopped them gold. Its a pain to find pics of durandal dd52s with the step lip in gold right now. the ones in the pic are 19"s and I went with 20s and theres NO way I would go -11. Im looking to stay around -2.5 to -3 camber.
I got got Odisk front and back. I wanted to be sure I couldnt buy a BBK, save myself some money in the future. I dont like going crazy with camber or stretching my tire so theres no chance of me throwing spacers on to get a bbk either.
Hopefully this isn't already asked somewhere. I tried doing research and haven't found anything. Is there a place to buy replacement rivets for work meisters? Thanks
good luck man...I remember years back people wanting volk rivet replacements and its near impossible to find them. I cant remember anyone actually get their hands on them. Its like you have to buy a single wheel to get your hands on the rivets. Sh*t, its even near impossible to find tightening specs on the rivets.
worst case scenario you can just buy a 16-17" work wheel and take those rivets out. Bound to be something on ebay
good luck man...I remember years back people wanting volk rivet replacements and its near impossible to find them. I cant remember anyone actually get their hands on them. Its like you have to buy a single wheel to get your hands on the rivets. Sh*t, its even near impossible to find tightening specs on the rivets. worst case scenario you can just buy a 16-17" work wheel and take those rivets out. Bound to be something on ebay
Ehh yeah I kinda thought so but figured id ask. Thanks man
You can buy the bolts themselves directly through WORK. Depending on how old your S1-3P's are though, they'll either be the older M7 size bolts, or the newer M8 size bolts.
Last edited by pfregeolle; Jan 7, 2015 at 04:58 AM.
Just purchased a set of work meister 3p's from evasive motorsports for my 06 350. Rear-19x10.5, +23 offset, front 19x 9.5, +24 offset and wrapping them in hankook ventus v12's. Cannot wait til they arrive.
hey guys wanted to run the work s1 3p 18x11 up front and 18x12 in the rear. My question is what offsets will fit if any at all, and what tires will fit, so i dont need to fabricate my rear fenders, let me know guys. thanks
hey guys wanted to run the work s1 3p 18x11 up front and 18x12 in the rear. My question is what offsets will fit if any at all, and what tires will fit, so i dont need to fabricate my rear fenders, let me know guys. thanks
they will fit, you'll need to atleast roll your rear fenders to fit a 12. how much camber do you want to run and how low do you plan on going? that's some info you'll need to know deciding when deciding offsets/tire sizes
Im only speaking from what I saw back in 2008-2009. It may be easy to find them now
