my New Rims
A close up at a slight angle of the rear and front. Like picture 4 except you are more level with the rim and a lil closer and then the same for the rear.
thanks
thanks
Originally Posted by Ep3
what angle do you want the pic at? i will take some more soon..
Originally Posted by ppw350Zunit
i also want to run 265/35/18 upfront and was wondering if you have any rubbing issues?
i took some quick pics now.. if my cuz can get me my cam soon i will replace these today if not tomorrow def.

295

265

295

295

let me know if you want different angleor to lift the car up..

295

265

295

295

let me know if you want different angleor to lift the car up..
Last edited by Ep3; Dec 20, 2005 at 11:48 AM.
EP3 I'm also going to be running a 18x8.5/18x9.5 wheels and was wondering if you have VDC on your Z and if so if you've had any trouble.
I wanna run 35 series tires but bet it will mess with the VDC on my performance model.
I wanna run 35 series tires but bet it will mess with the VDC on my performance model.
im running 9.5 at all the corners i dont have VDC but can refer you to a few threads.. as long as the back and front ratio stay the same it should not cause problems i only have tcs on a enth model and its never on
here you go
https://my350z.com/forum/wheels-and-tires/139732-anyone-run-nismo-lmgt4-s-9-5-all-around.html
https://my350z.com/forum/showthread....2&page=1&pp=20
here you go
https://my350z.com/forum/wheels-and-tires/139732-anyone-run-nismo-lmgt4-s-9-5-all-around.html
https://my350z.com/forum/showthread....2&page=1&pp=20
Last edited by Ep3; Dec 20, 2005 at 02:11 PM.
Looks perfect. That 265 up front is smooth. So Im gonna try and run 265/30/19's and 305/30/19's on my 8.5'' x 9.5 setup. Thanks for the quick post.
To the above poster, im currently running 245/35/19FR and 285/35/19 rear and i have vdc and i do not have any issues other than that the Turbo kit makes the wheels spin and if VDC is on it cuts in.
To the above poster, im currently running 245/35/19FR and 285/35/19 rear and i have vdc and i do not have any issues other than that the Turbo kit makes the wheels spin and if VDC is on it cuts in.
Originally Posted by Ep3
im running 9.5 at all the corners i dont have VDC but can refer you to a few threads.. as long as the back and front ratio stay the same it should not cause problems i only have tcs on a enth model and its never on
here you go
https://my350z.com/forum/showthread.php?t=139732
https://my350z.com/forum/showthread....2&page=1&pp=20
here you go
https://my350z.com/forum/showthread.php?t=139732
https://my350z.com/forum/showthread....2&page=1&pp=20
Bar.. if i could do it again i would run 275's in front the closer you run to the rear the more prone to overstear the car is..the car turns better or more effectivly with closer matching tire widths.. i tried to keep the nissan ratio 245 -275 on the nismo rims to my 265-295 but my father told me this is just to save people from themselves and encourage the car to understeer.. for the people who want to drive their car to potential it is hurting them.. i see what you saying with the tire kind of poking out in the back but it doesnt bother me too much hah good luck with your choices
Joe
Joe
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM
Tonyz_2004_350z
South East Marketplace
1
Oct 4, 2015 12:53 PM





