Volk RMC ?
03-20-2006, 09:13 PM
#4
Registered User
Thread Starter
Join Date: Aug 2003
Location: Jacksonville FL
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Thats awsome! could i have this done to my Volks? if they aren't already and is it the center only or the whole rim center+lip? I have gold SF challenges and im thinking about doing it? is it possible? and where can i get it done? any powder coating shop? And thanks again manny !
Last edited by A Keno Star; 03-20-2006 at 09:16 PM.
03-21-2006, 05:18 AM
#7
Originally Posted by A Keno Star
Hey manny, do you hang out with OZOC ? i been to a couple of their meets anyways thanks again for the info!
Yes I'm a member of OZOC, we've probally have met before. I've been with the club for about 2-3 years.
Trending Topics
03-21-2006, 05:31 AM
#8
Originally Posted by A Keno Star
Thats awsome! could i have this done to my Volks? if they aren't already and is it the center only or the whole rim center+lip? I have gold SF challenges and im thinking about doing it? is it possible? and where can i get it done? any powder coating shop? And thanks again manny !
Here is the link to a shop that has been specializing in this type of coating
http://www.goodrichtechnology.com/main.html
They'll be able to get it done for you.
About the whole rim, the only concern I would have is that if the coating process thickens the lips thus far causing an issue with remounting the center and or lug nuts
If you call the shop and ask of this I'm sure they should be capable enough to avoid this problem.
Just make sure that all holes especially the hub get covered, when I powder coated my wheels they did not cover all the wholes so I had to grind the hub, lug holes a bit to fit everything back in.
03-21-2006, 07:01 AM
#9
Registered User
iTrader: (13)
Join Date: May 2004
Location: Ontario, Canada
Posts: 6,002
Likes: 0
Received 0 Likes
on
0 Posts
here's the SF-Challenges in RMC for you to see
http://www.zmodified.com/gallery/displayimage.php?album=21&pos=1
They'd probrably look pretty hot with SB.
http://www.zmodified.com/gallery/displayimage.php?album=21&pos=1
They'd probrably look pretty hot with SB.
03-21-2006, 07:20 AM
#10
Registered User
Thread Starter
Join Date: Aug 2003
Location: Jacksonville FL
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by manny007
Well when I was looking into this for my old wheels I could not find a paint shop that can do this type of powder coating.
Here is the link to a shop that has been specializing in this type of coating
http://www.goodrichtechnology.com/main.html
They'll be able to get it done for you.
About the whole rim, the only concern I would have is that if the coating process thickens the lips thus far causing an issue with remounting the center and or lug nuts
If you call the shop and ask of this I'm sure they should be capable enough to avoid this problem.
Just make sure that all holes especially the hub get covered, when I powder coated my wheels they did not cover all the wholes so I had to grind the hub, lug holes a bit to fit everything back in.
Here is the link to a shop that has been specializing in this type of coating
http://www.goodrichtechnology.com/main.html
They'll be able to get it done for you.
About the whole rim, the only concern I would have is that if the coating process thickens the lips thus far causing an issue with remounting the center and or lug nuts
If you call the shop and ask of this I'm sure they should be capable enough to avoid this problem.
Just make sure that all holes especially the hub get covered, when I powder coated my wheels they did not cover all the wholes so I had to grind the hub, lug holes a bit to fit everything back in.
Awsome manny thanks a lot for the info i'll have to check it out, Well when i went to one of the OZOC meets it was at hooters and reason i came i was a good friend of brians and he invited me to go and there were a lot of nice Z's there and i remember most of them which one was yours? wha color? sweet thanks again bro !
03-21-2006, 07:23 AM
#11
Registered User
Thread Starter
Join Date: Aug 2003
Location: Jacksonville FL
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by noodleman
here's the SF-Challenges in RMC for you to see
http://www.zmodified.com/gallery/displayimage.php?album=21&pos=1
They'd probrably look pretty hot with SB.
http://www.zmodified.com/gallery/displayimage.php?album=21&pos=1
They'd probrably look pretty hot with SB.
03-21-2006, 04:06 PM
#13
Originally Posted by A Keno Star
Awsome manny thanks a lot for the info i'll have to check it out, Well when i went to one of the OZOC meets it was at hooters and reason i came i was a good friend of brians and he invited me to go and there were a lot of nice Z's there and i remember most of them which one was yours? wha color? sweet thanks again bro !
You should come by and hang out sometime
03-22-2006, 09:27 PM
#15
Master
iTrader: (65)
Join Date: Sep 2005
Location: SoCal
Posts: 2,527
Likes: 0
Received 0 Likes
on
0 Posts
Keno keno.. you should of ask me lol.. well I ask around and no one in the US can do that finish yet.. Why don't you sell your wheels and get the RMC SF Challenge or even better The GTS in RMC lol..
03-22-2006, 09:55 PM
#16
Registered User
Thread Starter
Join Date: Aug 2003
Location: Jacksonville FL
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by manny007
Mine was the SS with the Greddy front and sides and a Vizage rear, I also had Black Maya GR-5's
You should come by and hang out sometime
You should come by and hang out sometime
Keno
03-22-2006, 10:01 PM
#17
Registered User
Thread Starter
Join Date: Aug 2003
Location: Jacksonville FL
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Volk350Z
Keno keno.. you should of ask me lol.. well I ask around and no one in the US can do that finish yet.. Why don't you sell your wheels and get the RMC SF Challenge or even better The GTS in RMC lol..
LOL Brian i'd love to sell my Sf's for RMC Sf's or Gt-s's but i guyess i'll have to wait and see !=D And brian, your car is looking sick as always thanks again big brotha.
03-23-2006, 08:30 AM
#19
Registered User
Join Date: Mar 2004
Location: Chicago, IL
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Volk350Z
Keno keno.. you should of ask me lol.. well I ask around and no one in the US can do that finish yet..
You can have them done in chrome or black chrome. It can run anywhere from $150-$200 per wheel. I had my RO_JA Formula 5's done in black chrome.
03-23-2006, 08:33 AM
#20
Registered User
Join Date: Mar 2004
Location: Chicago, IL
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts