Here's mine.

 

Fronts have a +15mm spacer. Extended studs all corners and mutki open ended nuts. Just a quick heads up. Project kics Neo chrome R40 don't fit the LMZ5........nothing acorn style does. And it has a flat surface on the lug nut mounting area. Let me know what pictures you want to see and ill post them!

 

Any photos of the blacks on a car? I am interested in your wheels.

 

Had to show mine 19"

 

^^ Looks great, what BBK is that?

 

Wilwood BBK'z, Stock front bumper with the emblem recess filled in, Veilside CF front lip & side skirts, Stillen rear wing, GTS Rear window deflector, Nismo suspension & exhaust. Tried to keep the styling smooth and enhance what Nissan already did with the car without going to far off the edge.

 

Very clean setup

 

Hey all,

I have a set of LMGT4's, and love them, but ideally would love to make them flush as they still sit a little in the wheel well.

I've heard 5mm spacers can be used, also saw someone else say 10mm will fit, does anyone know the bottom line right answer for which spacers on fronts and rears will make the wheels flush with fenders?

I have silver 350z offset LMGT4 18x9's in front, and 18x9.5's in back. Running 265/40/18 in rear and 225/50/18 in front. My next set in a year or two will be 275/40/18 in rear and 245/40/18 in front. Tires on car now I got a great deal on, and although they aren't standard size for these rims they look and handle great, the amount of understeer is no big deal.

Thanks guys,

Saved

 

What are the offsets of your wheels?

 

A pic would help.

 

Have you read the big sticky thread on spacers?

 

+1 on offsets, and also are you willing to roll your fenders?

Is the car dropped? If so, do you have camber correction?

 

Oh sorry...was hoping the replying party or parties would know the offsets by heart as I don't remember - I'll look them up though, just stock Nismo offsets.

Car isn't dropped at all, stock springs.

Mind if I ask what a picture can show you? Pictures distort perspective so it's not like you can eyeball it and say...ohhhhh that's 10mm there..can you? Or am I wrong here?

I'll post the offsets later today when I have a little time, and thanks for the help sincerely.

Saved

 

Beautiful Z Jcity, if that grey one in your profile pic is yours.

 

In for pics...

 

You probably need 25 mm spacers front and back. You could probably run 30 mm in back if you want.

 

pix?

 

cant measure it and figure it out? (not being a smarttazz)

 

+25 front
+30 rear

245/40/18 and 275/40/18 is actually better spec tyres to be running than what you have already too.

 

With Stock suspension, your car will just look awkward with spaced out wheels. IMO you should lower your car first and then worry about filling the fender gap