Will 315/30-18's fit?
09-14-2006, 07:49 PM
#21
Banned
iTrader: (1)
Join Date: Dec 2005
Location: SAN DIEGO
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
What Up Steve?
Note:
Depends on the tire as well.
Some fender roll may be necessary. 30 MM offset is best. Also depends on the suspension, a true Coil OVER like our new VRT Road and Tracks, need a 3-mm spacer and Minor Fender roll.
Nitto 315 (actually measure 323-mm) on 10.5 rim, need 3 mm spacer
315 Mich. Pilot, no roll on NISMOs
Pirelli Corsa 315/TE 37 no roll
Hoosiers/NISMO/Need slight roll.
So, depending on the offset, Coil Over, and brand, 315s will fit.
Have fun, Race, Drift, and Drive Safe...Almost out of control...
M
Note:
Depends on the tire as well.
Some fender roll may be necessary. 30 MM offset is best. Also depends on the suspension, a true Coil OVER like our new VRT Road and Tracks, need a 3-mm spacer and Minor Fender roll.
Nitto 315 (actually measure 323-mm) on 10.5 rim, need 3 mm spacer
315 Mich. Pilot, no roll on NISMOs
Pirelli Corsa 315/TE 37 no roll
Hoosiers/NISMO/Need slight roll.
So, depending on the offset, Coil Over, and brand, 315s will fit.
Have fun, Race, Drift, and Drive Safe...Almost out of control...
M
09-14-2006, 08:03 PM
#22
Originally Posted by mraturbo
What Up Steve?
Note:
Depends on the tire as well.
Some fender roll may be necessary. 30 MM offset is best. Also depends on the suspension, a true Coil OVER like our new VRT Road and Tracks, need a 3-mm spacer and Minor Fender roll.
Nitto 315 (actually measure 323-mm) on 10.5 rim, need 3 mm spacer
315 Mich. Pilot, no roll on NISMOs
Pirelli Corsa 315/TE 37 no roll
Hoosiers/NISMO/Need slight roll.
So, depending on the offset, Coil Over, and brand, 315s will fit.
Have fun, Race, Drift, and Drive Safe...Almost out of control...
M
Note:
Depends on the tire as well.
Some fender roll may be necessary. 30 MM offset is best. Also depends on the suspension, a true Coil OVER like our new VRT Road and Tracks, need a 3-mm spacer and Minor Fender roll.
Nitto 315 (actually measure 323-mm) on 10.5 rim, need 3 mm spacer
315 Mich. Pilot, no roll on NISMOs
Pirelli Corsa 315/TE 37 no roll
Hoosiers/NISMO/Need slight roll.
So, depending on the offset, Coil Over, and brand, 315s will fit.
Have fun, Race, Drift, and Drive Safe...Almost out of control...
M
JET
09-15-2006, 05:24 PM
#23
Banned
iTrader: (1)
Join Date: Dec 2005
Location: SAN DIEGO
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JETPILOT
So I imagine that a 305 on a 10.5" rim with a 28 offset with a rolled fender should be perfect as well even with a 1.5" drop?
JET
JET
PM
if you need anything.
M
10-03-2006, 11:28 AM
#25
Originally Posted by knight_white99
I know that a 295/30 or 295/35 will fit, but Falken doesn't make the RT-615s in those sizes.itself.
http://www.falkentire.com/rt615_sizes.html
The RT615s run big though, my 255 fronts are actually a 265, and the 275 rears are nearly identical to a typical 285.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
