When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i only ask because at your height i think 255 in front would rub and push fender out if turning while going into and out of a driveway. i have 255 +12 in front and am having that problem so i have to go with 245 or flare front fender
i only ask because at your height i think 255 in front would rub and push fender out if turning while going into and out of a driveway. i have 255 +12 in front and am having that problem so i have to go with 245 or flare front fender
Thanks for that input. I was actually thinking of using a 15mm spacer up front (+7 net offset) with my 245's, and I had convinced myself it won't rub but that's with the wheel straight. Hadn't considered what would happen when the wheel is fully cut.
Thanks for that input. I was actually thinking of using a 15mm spacer up front (+7 net offset) with my 245's, and I had convinced myself it won't rub but that's with the wheel straight. Hadn't considered what would happen when the wheel is fully cut.
My old wheels were +15 all around with 255/35's in the front. No rubbing at all when the wheel was straight but if I was turning the slightest bump caused the front to rub. You've seen pics of my car so you can see the height I'm at in the front. Similar to your height it seems. And this was with factory alignment specs.
08-26-2012, 06:55 AM
