Notices
Wheels & Tires 350Z Rollers and Rubbers

tire pressure

Old Oct 4, 2006 | 09:17 PM
  #1  
creationv2's Avatar
creationv2
Thread Starter
Registered User
iTrader: (5)
 
Joined: Jan 2005
Posts: 1,323
Likes: 0
From: RC, CA
Default tire pressure

heeeey all i have a problem i think.....ive been keeping track of my tire pressure this week and one of the rear tires is consantly around 8-10 psi lower than the other tire.....(idk which, whichever is the bottom tire pressure on the dash guage)...and i chk the pressure every morning and when i get home, so cool and heated, and the cool state its about the same....but when heated such as when driving....theres that gap again.....so should i add air? or go to the dealership? or wha?
Reply
Old Oct 5, 2006 | 03:47 AM
  #2  
DavesZ#3's Avatar
DavesZ#3
350Z-holic
Premier Member
20 Year Member
iTrader: (26)
 
Joined: Jul 2003
Posts: 15,887
Likes: 23
From: Louisiana
Default

Bottom is usually the left/drivers side.

Are you checking pressure with a gauge or just going by the reading on the TPMS?


Nail in tire?
Leak at bead?
Reply
Old Oct 5, 2006 | 07:51 AM
  #3  
davidv's Avatar
davidv
Registered User
iTrader: (2)
 
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
Default

Originally Posted by creationv2
one of the rear tires is consantly around 8-10 psi lower than the other tire
The tire has a slow leak.
Reply
Old Oct 29, 2006 | 01:38 PM
  #4  
the2dwarf's Avatar
the2dwarf
Registered User
 
Joined: Oct 2006
Posts: 2
Likes: 0
From: Brimfield, MA
Default

Does anyone out there know how to defeat the TPMS ?
Am considering another set of wheels for the winter and plan to run them without the sensors and all the same size vs the staggeered size it calls for...
Reply
Old Oct 29, 2006 | 03:21 PM
  #5  
DavesZ#3's Avatar
DavesZ#3
350Z-holic
Premier Member
20 Year Member
iTrader: (26)
 
Joined: Jul 2003
Posts: 15,887
Likes: 23
From: Louisiana
Default

You're confusing TPMS and VDC. TPMS is the tire pressure monitoring. If you run wheels without the sensors, then the system won't display pressures. After driving on them for about 45 minutes, the warning will sound and the (!) light will stay on. It doesn't do anything but that.

If your car has TCS or VDC and you run non-staggered sizes, then that will trigger the TCS/VDC. You have to drive with the TCS/VDC off button pressed to keep it from kicking in.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lapham3
Maintenance & Repair
8
Oct 7, 2022 03:15 PM
apex locator
Autocross/Road
10
Jul 23, 2021 02:27 AM
MicVelo
NorCal Marketplace
9
Oct 4, 2015 07:55 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 01:17 PM.