Hey guys,

Got to put in my order for these wheels TODAY, and i'm hoping to get some opinions on offsets.

The wheels are 19x9 and 19x10's. They both come in the +28mm offset, which is the lowest i can get for them.

I've used the offset calculator and all, but i don't know how it'll look. So should i still get them???

Thanks.

http://www.rayswheels.co.jp/cgi-bin/...odel=020_77S_V

http://www.rayswheels.co.jp/cgi-bin/...odelName=77S_V

 

+28 is ok, youll find most poeple preffer to stay somewhere in the low 20's the most popular being +22 all the way around

 

Ya +28 is pretty much my only choice. I can get an awsome deal on them. But i want them flush without spacers.

But why spend all that money on something that doesnt even fit right?

 

yeah if you want them flush your gonna have to go with a lower offset. its YOUR money just make sure YOU are gonna be happy with your purchase.

 

This site doesn't show the 19x10 but 19x9s come in +16 and +24 in addition to the +28 (I'm guessing the 19X10s will too). I couldn't find the sizing chart for these on Mackin's site, though. In any event, I would order them by phone (or in person) and specify the exact offsets I wanted. Try some of the vendors here. Andy@Performance got my wheels for me .

http://www.businessvision.net/edge/M...t&PageNumber=8

 

Thanks. The 19x10's lowest offset is +28

 

Ahhh, it was at the beginning of the 19s list, I see it now. That sucks bud. You can always run some spacers.


EDIT: oops. Just saw that you don't want to run spacers.

 

it will work but with the +28 you can run 285 without rubbing

 

I have wolf77's with +28 and I didn't like how they looked. I added 15mm spacers and they're pretty much flush, if not sticking out slightly.