Aggressive Wheels and Stretched Tires....Welcome
New Member
iTrader: (4)
Join Date: Jul 2010
Location: Houston
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
doesnt it suck without lsd??? a lot of you that are getting stuck is cause you have base models. the reason why so many people have Z's now a days is cause base models are cheap now.
New Member
iTrader: (34)
Registered User
Hey guys, I was wondering if you guys could tell me whether or not 19x10 +10 255/35 and 19x12 +6 285/35 would fit.... Btw my z has around a 2 inch or so drop. I know ill need a fender roll but around how much camber should I run and also would I need a fender pull?
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
that drop wont fit the wheels... better go lower or change you wheel setup
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Yes, its a easy setup to run, and with a +6 you can prolly get a 295 on the rear, but pretty common is 265/275 35 depending on brand. But fr it to look right, all wheel gap must be eliminated because you WILL have to run a -1.5 to -2.5 camber. and it would look funny with wheel gap. 2" isnt enough to eliminate wheel gap. look for something 10.5 +15 range, with that drop and s alignment, it should fit flush. Keep in mind this is the "stance" thread, so any setup you see in here has at LEAST a 3" drop
Last edited by TehkMob; 01-16-2013 at 07:07 AM.
Registered User
iTrader: (9)
Join Date: Mar 2007
Location: San Antonio,Tx
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
car is almost back on track. A few more things needed then leaving it as is and moving onto something else.
Last edited by z33allme; 01-16-2013 at 02:48 PM.
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts