When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
http://www.flickr.com/photos/tubo_photo/8512079600/http://www.flickr.com/photos/tubo_photo/8512079600/ by http://www.flickr.com/people/tubo_photo/, on Flickr
Need some help guys. I have recently lowered my Z and been to 3 places (Firestone, tire kingdom, and Nissan) trying to get an alignment. All the shops say its to low to get on the rack. Even tried the dps600 alignment machine at Nissan which is used to align the gtr and it didn't work.
I live in West Palm Beach and wouldn't mind driving a bit. Please help
yo, good thing i saw this, I know somewhere where they can align low cars. I used to have a slammed xb and they did my alignment fine. ill send you a Pm with the guys number who can help you, its local in west palm too!
hey guys, im gonna be rebarreling some abc exclusives pretty soon. im going 19x11 +5 with 245/40 tire front and 19x12.5 -16 with 275/35 or 30 tire rear.im not too worried about the front right now, im a bit worried about how the rear will fit. im currently running 19x11 all around +15fr -2rear. 245/40 fr and 255/35/ tire right now in the rear and it almost has a finger gap. fenders are all rolled flat with tiny pull in the rear. camber is -2 fr and -4 rear. i might end up just doing 19x12 -10 if its too hard to fit with 12.5. opinions please?
your advice and opinions would be greatly appretiated, someone please help. wanted to know if anyone was running something similar or more aggressive, tried searching for 12.5 but couldnt find anything close to my offsets.
your advice and opinions would be greatly appretiated, someone please help. wanted to know if anyone was running something similar or more aggressive, tried searching for 12.5 but couldnt find anything close to my offsets.
my rears are 19x12.5 -1 and im running 275/30. not quite as aggressive but not so far off. i also had fender work done but im sure with some negative camber, pull, and 275/30, you wouldnt have an issue
my rears are 19x12.5 -1 and im running 275/30. not quite as aggressive but not so far off. i also had fender work done but im sure with some negative camber, pull, and 275/30, you wouldnt have an issue
this is how it sits with maybe -1/-2 camber
i envy your z, so cleaaan. could only imagine what it looks like in person. im currently running -4 camber with a good amount of space left, im sure theyll fit cause you look lower than i do. i just didnt want to have do massive pull to throw it off a stock look. thanks for the input tho man! ill be sure to post up some pics once the wheels are relipped.
