clean shot potato...TEXAS FTW

 

Here are a few of my previous cars:




Ordered some 18x10 +12 and 18x12 +20 for the Z so hopefully I'll be worthy of this thread soon!

 

so this is how she sits right now.. not as aggressive as most here but im happy for now.

 

im going Jradddd

 

Need little help !!!

I am trying to go lower in the front but seems like the upper control arm is stopping it. I remb seeing some people notching the inner fender or something. I can't seem to find it. Can someone post some pics or guide me to a link. Thank you

 

you can kinda see it here on royal_t's engine bay. im sure someone else will chime in with a better pic but its those holes at the highest most left/right hole

 

Anybody have any shots of a z with 19x11 front 19x12 rear negative offsets and camber specs?

 

rimtuck.com

 

^ this

 

Rimtuck has 1 example of 19x11/12 and it's positive offsets.

 

well, you can search through these threads... there is plenty of 19x11 fronts and millions of 19x12 rears

not trying to be an ***, but its been asked way too many times

 

This is my passenger side cut outs for the UCA because it was slamming into my car on little bumps. Took like 10 minutes and I've had it done for almost 2 years now with no problems.

 

Neither am I but have you been on Rimtuck lately? It's outdated. It shouldn't be the "Google" of stretched tires anymore.

 

just google "19x11 19x12 350z" there are tons of examples with most leading back to this thread in the past

 

here dude... people dont help people anymore..gotta do it yourself if you know what i mean

my z 18x12-5 0 camber






and my old set up
19x11-16 -3 camber




goodluck man

 

lito ur Z is always stunning!

 

 

Hey guys. Got some questions. Getting some new wheels for the z 19x11 single digit negatives for the front and 19x12 single digit negatives for the rear. How much work do I have ahead of me? What tire should I run? And how much camber should I be expecting to run. Fenders already rolled. I'm expecting to have to pull them.

 

And to keep up with the rules.

18x9.5 +12 all around 25mm spacer in the rear 5mm spacer in front. These are only temp wheels I know everyone hates spacers here.

 

Thanks lito. Car looks dope. I actually forgot i even asked that question. As for everyone else telling me to research I've been doing so for almost a year now. I know what it looks like. What I don't know is camber specs. I have an idea on tire size, I have an idea on camber, I also have an idea on what I'm walking into. Apparently this thread is for flaming and not helping. So please tell your fingers you're sorry for wasting their time and making them type useless "research that" information.