i am not trying to hijack a thread, so i will say one last thing. function 18x9.5 front 18x10.5 rear (or 18x9.5 square which i run)... function and looks =19. check out the 18" wheel thread

 

What I'm trying to ask is what size TIRES for my current rim, sorry to not be clear. I want to get the most function out of the rims I currently have. I originally made my own thread but got moved here

 

i cant really help you on that one....not educated enough when it comes to that size. check out the 20" wheel thread. waizzz is really good at stuff like this.. factory wheels size is 225 on 8.0 front and 245 on 8.5 rear (i think)

https://my350z.com/forum/wheels-and-...on-thread.html

 

Ok will do, thanks for your help

 

Here's a photo of my ride with edited colored wheels.

 

Is there any problems with running 305's in the rear? I'm running 285's now and it's slightly stretched and I'm not really a fan of that look.

My set up is 19x10.75 +15m offset

Will a 305/30/19 be fine with about a 1 inch drop? Or am I going to have to run a lot of negative camber?

 

Cjw, you're in the wrong thread. Go to the meaty fitment page. You're not stretched, and your fitment is not aggressive. I'm not trying to be mean, but you're not going to get those kind of answers in this thread.

Sorry.

 

^^^



QFT.

 

i don't have stretched tires? then could you please tell me what's going on with my rear tires? .....
looks stretched to me

 

Here we go..

 

You're in the wrong thread and of course there have been plenty of people who have run 305's even 335's just not in this thread

That is not stretched at all, looks normal to me...

 

you sitting at -2 offset with the 10mm spacers now?

Also, what size tires are you running?

 

my varrdogs..

 

 

Here you go, CJ: http://bit.ly/1e2IrUQ

 

@Stanyer89

Rear wheels are -2 offset with spacers. Fronts are 0 offset with spacers.
255/40/18 and 225/40/18

 

Love the color combo!!

 

at HIN a few weeks back

 

So i know my answer might be in these 1164 pages but thats a lot of read, my question is whats the widest and lowest offset i could run on my Z with just rolled fenders, got some ideas in my head but would love to hear from the professionals.

Im no stranger to running aggressive wheels and stretch tires as u can see with my last and current IS....no camber arms

 

With NO camber, you probably can't get too far past 11inches wide and MAYBE -5ish. However, you add some camber and you can get in the foot range. I'm at 18x12 -2 with just a roll (slight pull from driftin and rubbin)