Aggressive Wheels and Stretched Tires....Welcome
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Last edited by Phenom; Jul 18, 2014 at 07:48 PM.
Registered User
Joined: May 2012
Posts: 24
Likes: 0
From: Portland, OR
Theoretically yes, but it will be a negligible amount. It will be the length of the leg of a right triangle with a 1 inch hypoteneuse, opposite of the 7 degree angle which is the sine of 7 degrees, or about .12 inches.
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Appreciate that! I thought it might be a neglibible amount, but you never know. Thanks
Took a few pics yesterday. All of them can be seen here: https://www.flickr.com/photos/zzzpot...7645744625130/
I think its crazy how much my car has changed in the last 3 years. This pic is in the same spot from 2011
I think its crazy how much my car has changed in the last 3 years. This pic is in the same spot from 2011
Last edited by potato; Aug 4, 2014 at 04:00 AM.
Registered User
Joined: Sep 2008
Posts: 908
Likes: 28
From: Winnipeg, MB
Check out the hashtag #bebackin2015 on instagram and Http://toptierimports.com/index.php?topic=6109.250
^^Wow Potato...that is fn clean man! Props to you man
Thanks man, It was a custom build by Ramey Built from Va Beach. Its Berk test pipes to a custom y pipe, to vibrant cat and resonator 3" to a 4" straight exit. I had a muffler at first but it busted long ago when the car was lower. I'll try to dig up the old pic of the underbody
Thanks man, It was a custom build by Ramey Built from Va Beach. Its Berk test pipes to a custom y pipe, to vibrant cat and resonator 3" to a 4" straight exit. I had a muffler at first but it busted long ago when the car was lower. I'll try to dig up the old pic of the underbody
Registered User
Joined: Jul 2012
Posts: 221
Likes: 0
From: Peoria il
Plan on ordering some deep concave 3 piece wheels.
I am pulled and rolled all around but want to be aggressive and plan in running negative camber.
I have adjustable camber arms all around.
I was thinking 20x10 -10 4 inch lips and 20x11 -1 5.5 inch lips is that too aggressive or good.
I don't have the last specs of my wheels but they where 19x11.5 with a 245/35 and 19x12.5 with a 265/35.
I didn't like that much stretch so deciding to go less wide but same aggressiveness.
The other wheels were bbk friendly and had 4 inch lips in front and 5 in the rear.
Thanks
I am pulled and rolled all around but want to be aggressive and plan in running negative camber.
I have adjustable camber arms all around.
I was thinking 20x10 -10 4 inch lips and 20x11 -1 5.5 inch lips is that too aggressive or good.
I don't have the last specs of my wheels but they where 19x11.5 with a 245/35 and 19x12.5 with a 265/35.
I didn't like that much stretch so deciding to go less wide but same aggressiveness.
The other wheels were bbk friendly and had 4 inch lips in front and 5 in the rear.
Thanks