Aggressive Wheels and Stretched Tires....Welcome
08-20-2014, 05:31 PM
Was just trying to see what your camber set up is to use as a reference.
08-20-2014, 07:18 PM
Hardest Setting
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
^^^
you shouldn't be rubbing, if you are it's minimal and expected.
Front: 19x9.5 +4 245/35
Rear: 19x10.5 +5 275/35
Just get someone to roll/pull it slightly more...also make sure the 1..maybe 2 screws in the fender liner are removed.
NOTE
For all you slammed addicts make sure you are doing it correctly, by that ensure that your front wheel well are "clear". Meaning that your car can compress at least a 1-1.5 inches roughlywith out touching anything.
This means that your suspension needs to be somewhat stiff to prevent your car from just being low, and slamming around.
One last thing, check your fender liners if you run them, because there is a pinch weld that can cut your tires.
you shouldn't be rubbing, if you are it's minimal and expected.
Front: 19x9.5 +4 245/35
Rear: 19x10.5 +5 275/35
Just get someone to roll/pull it slightly more...also make sure the 1..maybe 2 screws in the fender liner are removed.
NOTE
For all you slammed addicts make sure you are doing it correctly, by that ensure that your front wheel well are "clear". Meaning that your car can compress at least a 1-1.5 inches roughlywith out touching anything.
This means that your suspension needs to be somewhat stiff to prevent your car from just being low, and slamming around.
One last thing, check your fender liners if you run them, because there is a pinch weld that can cut your tires.
08-20-2014, 08:34 PM
I'm within stock alignment tolerances with no rubbing. My tires are slightly more stretched with the wheels being .5" wider f/r. You can kind of tell in this pic the amount of clearance. My specs are very conservative for this thread. lol
Last edited by mr. sparco; 08-20-2014 at 08:49 PM.
08-21-2014, 11:00 AM
Registered User
Join Date: Mar 2013
Location: London
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Recently had the front bumper smoothed, fitted and INGs front lip and some side diffusers.
Had the pleasure of it being shot by Ben Macrae, he takes awesome shots B)
Fitment shot
He also shot my girlfriends Cooper S too
Had the pleasure of it being shot by Ben Macrae, he takes awesome shots B)
Fitment shot
He also shot my girlfriends Cooper S too
08-21-2014, 11:30 AM
08-21-2014, 11:59 AM
^^^
you shouldn't be rubbing, if you are it's minimal and expected.
Front: 19x9.5 +4 245/35
Rear: 19x10.5 +5 275/35
Just get someone to roll/pull it slightly more...also make sure the 1..maybe 2 screws in the fender liner are removed.
NOTE
For all you slammed addicts make sure you are doing it correctly, by that ensure that your front wheel well are "clear". Meaning that your car can compress at least a 1-1.5 inches roughlywith out touching anything.
This means that your suspension needs to be somewhat stiff to prevent your car from just being low, and slamming around.
One last thing, check your fender liners if you run them, because there is a pinch weld that can cut your tires.
you shouldn't be rubbing, if you are it's minimal and expected.
Front: 19x9.5 +4 245/35
Rear: 19x10.5 +5 275/35
Just get someone to roll/pull it slightly more...also make sure the 1..maybe 2 screws in the fender liner are removed.
NOTE
For all you slammed addicts make sure you are doing it correctly, by that ensure that your front wheel well are "clear". Meaning that your car can compress at least a 1-1.5 inches roughlywith out touching anything.
This means that your suspension needs to be somewhat stiff to prevent your car from just being low, and slamming around.
One last thing, check your fender liners if you run them, because there is a pinch weld that can cut your tires.
Yeah I need to get those screws out. I'll look for that pinch weld as well although I think I should be fine since I'm not slammed.
Yeah, I think the bit of stretch you have more than I do creates enough clearance. I'm not rubbing a whole lot just when there's a good sized dip or a pot hole I didn't see.
Car is looking amazing btw
08-26-2014, 11:01 AM
Registered User
iTrader: (2)
Join Date: Aug 2009
Location: AUBURN, CA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
<a href="http://s1291.photobucket.com/user/Bradley_Ward/media/2e5f91a9-126a-4fd4-8b9b-e87c88aefe34_zps2fd825e9.jpg.html" target="_blank"><img src="http://i1291.photobucket.com/albums/b557/Bradley_Ward/2e5f91a9-126a-4fd4-8b9b-e87c88aefe34_zps2fd825e9.jpg" border="0" alt=" photo 2e5f91a9-126a-4fd4-8b9b-e87c88aefe34_zps2fd825e9.jpg"/></a>
09-04-2014, 12:31 AM
Registered User
Join Date: Mar 2012
Location: Mililani, Hawaii
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
clean af
hey are you on broadway static coils...i was sent a picture of your car when i asked broadway static if they made an application for the 350z. i love your car bro. do you like the coils? like would you recommend them to people that want to drive low
Last edited by SR71; 09-04-2014 at 04:37 PM.
09-09-2014, 06:27 PM
Might be parting-out my car soon... Since they banned slamming and stretched tires in Quebec, cops have nothing better to do than send me to inspection and destroy my style.
09-09-2014, 06:42 PM
That sucks man. Car looks great. Maybe raise her up, throw some beefy tires on her? You might just fall in love with the car all over again in a different way!
09-10-2014, 08:36 AM
One of my favorites, by far. Maybe rock the fuctional meaty/flush look? I'd hate to see this car get parted out..