Aggressive Wheels and Stretched Tires....Welcome
Toasty
iTrader: (4)
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Last edited by Phenom; 07-18-2014 at 07:48 PM.
Registered User
Join Date: May 2012
Location: Portland, OR
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Theoretically yes, but it will be a negligible amount. It will be the length of the leg of a right triangle with a 1 inch hypoteneuse, opposite of the 7 degree angle which is the sine of 7 degrees, or about .12 inches.
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Don't mind the trigonometry review, I just wanted to explain so it doesn't look like I pulled a length out of my ***.
Appreciate that! I thought it might be a neglibible amount, but you never know. Thanks
New Member
iTrader: (4)
Join Date: Jul 2010
Location: Houston
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Took a few pics yesterday. All of them can be seen here: https://www.flickr.com/photos/zzzpot...7645744625130/
I think its crazy how much my car has changed in the last 3 years. This pic is in the same spot from 2011
I think its crazy how much my car has changed in the last 3 years. This pic is in the same spot from 2011
Last edited by potato; 08-04-2014 at 04:00 AM.
Registered User
Check out the hashtag #bebackin2015 on instagram and Http://toptierimports.com/index.php?topic=6109.250
Registered User
iTrader: (6)
^^Wow Potato...that is fn clean man! Props to you man
Thanks man, It was a custom build by Ramey Built from Va Beach. Its Berk test pipes to a custom y pipe, to vibrant cat and resonator 3" to a 4" straight exit. I had a muffler at first but it busted long ago when the car was lower. I'll try to dig up the old pic of the underbody
Thanks man, It was a custom build by Ramey Built from Va Beach. Its Berk test pipes to a custom y pipe, to vibrant cat and resonator 3" to a 4" straight exit. I had a muffler at first but it busted long ago when the car was lower. I'll try to dig up the old pic of the underbody
Registered User
Plan on ordering some deep concave 3 piece wheels.
I am pulled and rolled all around but want to be aggressive and plan in running negative camber.
I have adjustable camber arms all around.
I was thinking 20x10 -10 4 inch lips and 20x11 -1 5.5 inch lips is that too aggressive or good.
I don't have the last specs of my wheels but they where 19x11.5 with a 245/35 and 19x12.5 with a 265/35.
I didn't like that much stretch so deciding to go less wide but same aggressiveness.
The other wheels were bbk friendly and had 4 inch lips in front and 5 in the rear.
Thanks
I am pulled and rolled all around but want to be aggressive and plan in running negative camber.
I have adjustable camber arms all around.
I was thinking 20x10 -10 4 inch lips and 20x11 -1 5.5 inch lips is that too aggressive or good.
I don't have the last specs of my wheels but they where 19x11.5 with a 245/35 and 19x12.5 with a 265/35.
I didn't like that much stretch so deciding to go less wide but same aggressiveness.
The other wheels were bbk friendly and had 4 inch lips in front and 5 in the rear.
Thanks