Aggressive Wheels and Stretched Tires....Welcome
06-21-2009, 01:54 PM
#3041
Basically I need a much shorter shock. That way I can preload the spring and still be able to get the ride height I need. We measured that I need another shock about 1.5-2" shorter and I'll be good to go. I am going to go to Ksport and see what other shock bodies they have. Hopefully they have something on hand I can use but if not they said they will custom build me one which can take about a week to get here. No biggie.
On a side note, I left the coilovers in the car and preloaded the rear and raised the car to about 1/2" lower than my Skunk2 springs on stock struts was and these Ksport's ride extremely well. I have them valved full stiff right now and it is perfect for street driving. Fairly stiff but not bouncy whatsoever and very controlled. These are a true coilover in the rear with factory spring rates of 12/7 but I changed the rear springs to 10kg. I am really impressed with these coilovers.
06-21-2009, 01:59 PM
#3042
BTW, I thought 20s were gonna look way too big since I don't have a lip kit yet but it wasn't too bad. Of course I plan on doing a front lip and sides soon. I already have the Mastergrade cf rear diffuser that I have yet to install.
06-21-2009, 02:23 PM
#3043
Registered User
iTrader: (38)
Join Date: Apr 2005
Location: Hampton VA
Posts: 1,349
Likes: 0
Received 0 Likes
on
0 Posts
Sneak peek of my new setup. In this shot, I have only my front coilovers installed. It was hot as **** yesterday and I managed to change out my whole front brake setup before starting on the suspension so I'll finish the rears this week sometime.
Yes, these wheels have been around. There is no need to chime in and point that out if that is your only purpose. Offsets were on point so I had to pick them up.
Yes, these wheels have been around. There is no need to chime in and point that out if that is your only purpose. Offsets were on point so I had to pick them up.
06-21-2009, 02:50 PM
#3045
Sneak peek of my new setup. In this shot, I have only my front coilovers installed. It was hot as **** yesterday and I managed to change out my whole front brake setup before starting on the suspension so I'll finish the rears this week sometime.
Yes, these wheels have been around. There is no need to chime in and point that out if that is your only purpose. Offsets were on point so I had to pick them up.
Yes, these wheels have been around. There is no need to chime in and point that out if that is your only purpose. Offsets were on point so I had to pick them up.
06-21-2009, 03:51 PM
#3046
Registered User
iTrader: (38)
Join Date: Apr 2005
Location: Hampton VA
Posts: 1,349
Likes: 0
Received 0 Likes
on
0 Posts
Yes, 245/35 and 275/30's (currently)
06-21-2009, 06:44 PM
#3047
Thanks man! Yeah it is coming along. I'll get it all fitted up soon enough, I have learned to become more patient in my older age LOL.
BTW, I thought 20s were gonna look way too big since I don't have a lip kit yet but it wasn't too bad. Of course I plan on doing a front lip and sides soon. I already have the Mastergrade cf rear diffuser that I have yet to install.
BTW, I thought 20s were gonna look way too big since I don't have a lip kit yet but it wasn't too bad. Of course I plan on doing a front lip and sides soon. I already have the Mastergrade cf rear diffuser that I have yet to install.
also I was think about eh Mastergrade CF rear diffuser. do you know how low that thing is going to sit below your exhaust?
Thanks
06-22-2009, 06:28 PM
#3054
Well I mounted up a 255/30/20 Proxes 4 on my rear 11" tonight and it holds air and seated but doesn't seat all the way to the lip lol. Its a couple mm away on the front and back. You can stick a quarter in there and it will touch the actual barrel of the rim. I'll get pics in a bit. Not sure I want to chance driving on that hardcore of a stretch.
I don't want to run a 265/30/20 so I might just find a tire that runs wider since the Proxes 4 are a very narrow tire.
Side note, tomorrow I am picking up shorter rear shock bodies (so I can go lower and keep the springs preloaded), front & rear camber arms and rear toe arms. I will try to work on the car during the week nights after work but more than likely I may have to wait till the weekend.
I don't want to run a 265/30/20 so I might just find a tire that runs wider since the Proxes 4 are a very narrow tire.
Side note, tomorrow I am picking up shorter rear shock bodies (so I can go lower and keep the springs preloaded), front & rear camber arms and rear toe arms. I will try to work on the car during the week nights after work but more than likely I may have to wait till the weekend.
06-22-2009, 06:39 PM
#3055
Registered User
iTrader: (9)
Join Date: Feb 2006
Location: New Orleans
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
man that audi stance is hard!! love it!! i scratch the lip of my rims when i put those 15mm spacer in the back and my stance looked like that. must be the size rims. do you know the spec on the wheels royal?
06-22-2009, 06:54 PM
#3057
Well I mounted up a 255/30/20 Proxes 4 on my rear 11" tonight and it holds air and seated but doesn't seat all the way to the lip lol. Its a couple mm away on the front and back. You can stick a quarter in there and it will touch the actual barrel of the rim. I'll get pics in a bit. Not sure I want to chance driving on that hardcore of a stretch.
I have a 245 on my 11" and I can freakn grab the poke with my fingers
I'll get the specs
06-22-2009, 08:39 PM
#3059
hatchboi - Nah man I wanna stay away from 35 series in the rear. I did some test fitting tonight and the 255/30 is F N right on the money!!! Its gonna work perfectly.
Royal - Yeah man, fugg it. I'm gonna roll with these 255/30's. They have mad poke. So what if you can see a lil barrel? Gotta roll hard and do what we do.
Here are some more pics of the progress. I'll have these bitches on this week for sure after I install my camber arms, roll the rears a lil bit and lower the car so its tucking about 1/2 tire all the way around. I don't think it will be hard at all.
Here's some more pics I snapped tonight....
F*** 35 series for the rear (at least with 20s), I dunno WTF I was smoking thinking I could get away with that. 255/35 left and 255/30 right.
Perfect stretch for the front I think
Rear
A lil more camber and drop, roll the rear and I'm done.
Almost there.....just need a few more parts that I'm getting tomorrow and I'll be done soon
Royal - Yeah man, fugg it. I'm gonna roll with these 255/30's. They have mad poke. So what if you can see a lil barrel? Gotta roll hard and do what we do.
Here are some more pics of the progress. I'll have these bitches on this week for sure after I install my camber arms, roll the rears a lil bit and lower the car so its tucking about 1/2 tire all the way around. I don't think it will be hard at all.
Here's some more pics I snapped tonight....
F*** 35 series for the rear (at least with 20s), I dunno WTF I was smoking thinking I could get away with that. 255/35 left and 255/30 right.
Perfect stretch for the front I think
Rear
A lil more camber and drop, roll the rear and I'm done.
Almost there.....just need a few more parts that I'm getting tomorrow and I'll be done soon