Aggressive Wheels and Stretched Tires....Welcome
07-04-2009, 11:49 AM
#3181
Registered User
iTrader: (3)
Join Date: Aug 2007
Location: Tennessee
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
This this isnt super aggressive so you wont have to go with an extreme stretch unless you plan to run a spacer. A 275/35 will be your best bet. It will give you slight stretch but will still give you a large contact patch.
07-04-2009, 02:20 PM
#3183
Registered User
iTrader: (28)
Join Date: Jun 2006
Location: Ewa Beach, Hawaii
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
I really want that stretched look. I just bought the do luck widebody and it runs 30mm rear over fenders and 10mm front fenders. What size rim and offset do you guys think I will need to get that poke without spacers?
I was thinking 10.5J fronts and 12.5J rears. with 255 fronts and 275 rears? How does that sound? The biggest problem is that I have BBK's and I dont know what the offsets need to be to make this happen. Its not like I am going to go out an buy tons of rims to figure it out.
Any ideas?
I was thinking 10.5J fronts and 12.5J rears. with 255 fronts and 275 rears? How does that sound? The biggest problem is that I have BBK's and I dont know what the offsets need to be to make this happen. Its not like I am going to go out an buy tons of rims to figure it out.
Any ideas?
07-04-2009, 10:12 PM
#3185
Registered User
Join Date: Jun 2008
Location: West Covina
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
07-04-2009, 10:46 PM
#3186
Registered User
iTrader: (8)
Join Date: Apr 2008
Location: Kennesaw, GA
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
Thats some wild fitment on your z32... seems like when I had my z32 no one ran an aggresive setup, now when I surf the z32 forums I see more and more pop-up. looks good.
07-05-2009, 11:28 AM
#3188
Registered User
Join Date: Jun 2008
Location: West Covina
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Totally. When I got the Z32, I wanted to push the fitment on it and ever since, more and more have slowly started seeing they have push the fitment on the Z as well. There are a couple of us that are running wild set up compared to everyone else, without having to go the way of having to go narrower than a 245 on our wheels.
07-05-2009, 05:46 PM
#3192
I really want that stretched look. I just bought the do luck widebody and it runs 30mm rear over fenders and 10mm front fenders. What size rim and offset do you guys think I will need to get that poke without spacers?
I was thinking 10.5J fronts and 12.5J rears. with 255 fronts and 275 rears? How does that sound? The biggest problem is that I have BBK's and I dont know what the offsets need to be to make this happen. Its not like I am going to go out an buy tons of rims to figure it out.
Any ideas?
I was thinking 10.5J fronts and 12.5J rears. with 255 fronts and 275 rears? How does that sound? The biggest problem is that I have BBK's and I dont know what the offsets need to be to make this happen. Its not like I am going to go out an buy tons of rims to figure it out.
Any ideas?
07-05-2009, 05:57 PM
#3193
Registered User
iTrader: (28)
Join Date: Jun 2006
Location: Ewa Beach, Hawaii
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
That will give me something like your poke look you think? As far as tires. I was thinking if I can put 11's on the front 255? And 13 on the rears 275? Or do you think its not aggressive enough?
I see below on 10's he is running 225 I dont know about the 40 part but I want this look.
Last edited by nosurf2day; 07-05-2009 at 06:02 PM.
07-05-2009, 06:49 PM
#3194
after alignment...still needs to go a bit lower but i just got her back today give me a break.
after 25mm spacers up front. not keeping the 255/30 up front gonna go a little more narrow and taller not sure what yet tho.
prob going back for another alignment after i cut the holes in the front fender wells to get to the SPC camber arms.
pics suck..sorry tomorrow ill have nice ones.
after 25mm spacers up front. not keeping the 255/30 up front gonna go a little more narrow and taller not sure what yet tho.
prob going back for another alignment after i cut the holes in the front fender wells to get to the SPC camber arms.
pics suck..sorry tomorrow ill have nice ones.
