haha i guess silverstone z guys think alike

 

I never said it is really aggressive.. but its flush with the fender which is good enough for me.

Ya just like your rims lol. 18/9.5 +7

 

^haha yep, and thats why im selling them

 

im just telling you once you lower it and your front camber sets in, your wheel will tuck in the fender and you will have a nice size gap.


rears are fine we are just giving tips to make it aggressive.

 

Thanks man you think I should put a 10mm spacer for the front once its lowered more ? I dont want the fronts to stick out more than the rear.

 

With your setup now your fronts will be sunk in alot and your rears will poke. You should do a 10-15mm spacer up front.

To make the fronts come out more and match the rear.

 

ok thanks once I have it lowered more I will put a 10mm on the front so its -10 front and -15 rear.

 

^^ you did not hear me 20mm spacer bottom line.. In the pic you posted of the previous owner, he must have had at less a 10-15 spacer on there cause yours looks sunken in and his looks flush..

 

He did not have a spacer on there... his looks like that because how he took the pic and I did not take a good pic. he had 245's on the front I have 225's. A bit of my rim is exposed which passes the fender.

 

Okay what do I know,, I have a 10"-8 up front so don't take my word for it..

 

Lol listen to the man....

Ive seen the exact same setup on a couple of Z's including b_nazty's and I think he was running a 15 up front!

with a 225 you can def go wider

 

This pic was taken almost a month ago, new pics of my new stance end of this week

 

First pic of new stance here in the UK, new kit going on in next couple of weeks, will do proper shoot then. Any lower than this over here, you couldn't get out of the drive!

 

I have both Works and Volks now

(see sig)

 

haha you right, buts that only cus your a baller



why is it so hard to decided which rims i want to buy next, hahah

 

Yah 20mm would prob be perfect but id say ATLEAST a 15mm....I had a 9.5 -3.

Would be your 9 at -9. Thats a 10mm spacer right there to get how I was. I could have poked more though. Very least a 10mm.....Id prob do a 15mm or 20mm.

 

I have works and 5 Axis....now what bish

 

yea but who you know got WORK and MUSTANG RIMS YO!

 

Jit13 I think you need to listen to those mbrs in here trying to help you to have a nice aggressive setup. Most of the guys that gave u some feedback are running negative offset if not very close to it and you are on the "0" & "+". Anyways when you lower your Z we are going to find out who is right on the ball lol :P