Aggressive Wheels and Stretched Tires....Welcome
#1764
Registered User
iTrader: (11)
Join Date: Feb 2006
Location: Seattle/Portland
Posts: 2,754
Likes: 0
Received 0 Likes
on
0 Posts
i love this thread!
im looking for a bit of advice. ive got a set of 19x8.5's and 9.5's le37's with a +22 offset all around. i recently slammed my car on some stance al+ pro coilovers and kinetix a arms, rear endlinks and toe arms. i was thinking about running something like a 215 35's up front and 235 35's in the back with 15mm spacers on all four corners. i just want it to look nice but dont want a whole lot of negative camber to get my wheels sitting as flush as possible. any help would be greatly appreciated.
im looking for a bit of advice. ive got a set of 19x8.5's and 9.5's le37's with a +22 offset all around. i recently slammed my car on some stance al+ pro coilovers and kinetix a arms, rear endlinks and toe arms. i was thinking about running something like a 215 35's up front and 235 35's in the back with 15mm spacers on all four corners. i just want it to look nice but dont want a whole lot of negative camber to get my wheels sitting as flush as possible. any help would be greatly appreciated.
#1765
Out of hiatus
iTrader: (234)
^^^LOL. That was some major negative camber that we had to do to just to test out how much the Zeals dropped in the back. The fenders were actually sitting on the tire, which is why we were glad that we maxed out the negative camber in the rear at the time. However, I did get the fenders rolled and got the alignment setup.
-4 FR and -3.5 RR. I'll definitely run some spacers although the TE are +12 all around. Can't wait for the custom Work Wheels to come in and the new paint job with body kit. The car will probably be sitting on the ground since this is lower than my old setup and my kit then used to only sit 1 inch off the ground
-4 FR and -3.5 RR. I'll definitely run some spacers although the TE are +12 all around. Can't wait for the custom Work Wheels to come in and the new paint job with body kit. The car will probably be sitting on the ground since this is lower than my old setup and my kit then used to only sit 1 inch off the ground
Last edited by Rickdogg; 03-13-2009 at 01:57 AM.
#1770
Out of hiatus
iTrader: (234)
I have a basic visual in my head, but like most of my ideas...it typically changes slightly as the actual work date approaches. It's going to be fun because the car is going to ship to Japan for all of the work. I'll save all of the details on all of that stuff for the future. I'll definitely post up as things progress. I think this is going to be a great experience and something special.
#1773
Registered User
iTrader: (5)
Join Date: Apr 2008
Location: illinois
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I have a basic visual in my head, but like most of my ideas...it typically changes slightly as the actual work date approaches. It's going to be fun because the car is going to ship to Japan for all of the work. I'll save all of the details on all of that stuff for the future. I'll definitely post up as things progress. I think this is going to be a great experience and something special.
#1780
Out of hiatus
iTrader: (234)
I can't wait either. It will suck not being able to drive it for a while, but it's okay. I'll see the car in Japan as well so