Notices
Wheels & Tires 350Z Rollers and Rubbers

Aggressive Wheels and Stretched Tires....Welcome

Thread Tools
 
Search this Thread
 
Old 10-12-2011, 11:48 AM
  #17881  
HUEY
Banned
 
HUEY's Avatar
 
Join Date: Oct 2011
Location: gainesville, FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TehkMob
For the rear 19x11 zero to neg 8 offset will be good for running minimal camber. I'm on a 18x12 -6 with -3 camber. For the fronts you could run about the same on a 9.5 from a zero offset to a -12 offset will be fine fronts are real dependent on Tire size though. I'd opt for a 10"wide front w/225/35/19

Good luck.
thanks for the input! Since I'll be running 19" all around, wheels will be a bit harder to fit, and greater chances of fenders hitting the lip of the wheel. Is there anyone on here running 19" around the same spec, I just want to get an idea of how it'll sit, and how much camber is needed? Im going to run stretch tires, fr-225/35/19 Rr-255/35/19

that's aggressive!!!did you have to pull the fenders? you have pics?

Last edited by HUEY; 10-12-2011 at 11:51 AM.
Old 10-12-2011, 11:56 AM
  #17882  
vex008
New Member
iTrader: (4)
 
vex008's Avatar
 
Join Date: Sep 2008
Location: CI
Posts: 2,650
Received 17 Likes on 14 Posts
Default

not sure how the setup would transfer / fit from a G to on a Z but its closest to the specs mentioned on rimtuck.com
http://www.rimtuck.com/search/thumbn...fsetr=0&sort=1
Old 10-12-2011, 03:28 PM
  #17883  
TehkMob
Registered User
iTrader: (23)
 
TehkMob's Avatar
 
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HUEY
thanks for the input! Since I'll be running 19" all around, wheels will be a bit harder to fit, and greater chances of fenders hitting the lip of the wheel. Is there anyone on here running 19" around the same spec, I just want to get an idea of how it'll sit, and how much camber is needed? Im going to run stretch tires, fr-225/35/19 Rr-255/35/19

that's aggressive!!!did you have to pull the fenders? you have pics?

http://s749.photobucket.com/home/Yoshi0o/index you can look through my different setups, the ordens are my most current setup. Most my specs on the front a almost the same rear specs vary from 12 +4 up to 11.5 -24.. 19x10/11 -5 with 225/35/19 and 255/35 with right tire will get best results for what you are asking for.
Old 10-12-2011, 04:30 PM
  #17884  
JeffJohnries
Registered User
iTrader: (3)
 
JeffJohnries's Avatar
 
Join Date: Mar 2011
Location: Orlando, Florida
Posts: 276
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by zombieskicks
Max-G I love the set up, and here's mine, going to get them painted glossy aqua/teal soon
Where can I get these center caps?!
Old 10-12-2011, 06:04 PM
  #17885  
phiooz
New Member
iTrader: (4)
 
phiooz's Avatar
 
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Default

Old 10-12-2011, 06:20 PM
  #17886  
ASTIG_Z
New Member
iTrader: (8)
 
ASTIG_Z's Avatar
 
Join Date: Jul 2005
Location: SOCAL
Posts: 3,022
Likes: 0
Received 0 Likes on 0 Posts
Default

^^
what wheels are those? vsxx with a step lip?
Old 10-12-2011, 06:36 PM
  #17887  
datsunHEAD
Registered User
iTrader: (17)
 
datsunHEAD's Avatar
 
Join Date: Feb 2008
Location: Salinas,monterey and seaside..
Posts: 1,793
Likes: 0
Received 1 Like on 1 Post
Default

you can make those centercaps, go to the fatlace store and just buy the circle "ill"stickers and slap them on
Old 10-12-2011, 07:11 PM
  #17888  
phiooz
New Member
iTrader: (4)
 
phiooz's Avatar
 
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ASTIG_Z
^^
what wheels are those? vsxx with a step lip?
yessir, vs-xx with custom step lip
Old 10-12-2011, 07:25 PM
  #17889  
HUEY
Banned
 
HUEY's Avatar
 
Join Date: Oct 2011
Location: gainesville, FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TehkMob
http://s749.photobucket.com/home/Yoshi0o/index you can look through my different setups, the ordens are my most current setup. Most my specs on the front a almost the same rear specs vary from 12 +4 up to 11.5 -24.. 19x10/11 -5 with 225/35/19 and 255/35 with right tire will get best results for what you are asking for.
sweet! seems like you pulled the rear quarter panels with the ordens, correct? I'm planning on running 19x9.5 +8, 19x11 +0 with 225/35 and 255/35..What will it take to fit them? I dont want to flare my quaters.
Old 10-12-2011, 07:25 PM
  #17890  
.eoJ
Registered User
iTrader: (1)
 
.eoJ's Avatar
 
Join Date: Jun 2010
Location: So-Cal
Posts: 113
Likes: 0
Received 1 Like on 1 Post
Thumbs up

looks clean phiooz
Old 10-12-2011, 07:26 PM
  #17891  
HUEY
Banned
 
HUEY's Avatar
 
Join Date: Oct 2011
Location: gainesville, FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by phiooz
[IMG]https://my350z.com/forum/wheels-and-tires/...
nice fitment! what size and offset are they if you dont mind sharing?

Last edited by Waiz; 10-16-2011 at 08:29 AM.
Old 10-12-2011, 07:32 PM
  #17892  
phiooz
New Member
iTrader: (4)
 
phiooz's Avatar
 
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Default

18x10 -8 215/40
18x12 -3 255/35
Old 10-12-2011, 07:45 PM
  #17893  
HUEY
Banned
 
HUEY's Avatar
 
Join Date: Oct 2011
Location: gainesville, FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by phiooz
18x10 -8 215/40
18x12 -3 255/35
how much work was needed to fit them?
Old 10-12-2011, 08:02 PM
  #17894  
VQpoweredZ
Registered User
iTrader: (18)
 
VQpoweredZ's Avatar
 
Join Date: Aug 2006
Location: Pennsylvania
Posts: 2,245
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by phiooz
yessir, vs-xx with custom step lip
Phiooz that looks soo good. Must have more pics haha.

Last edited by VQpoweredZ; 10-12-2011 at 08:07 PM.
Old 10-12-2011, 08:03 PM
  #17895  
phiooz
New Member
iTrader: (4)
 
phiooz's Avatar
 
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Default

well before, i had a more aggressive setup 18x11.5 -23 in the rear so i had to do some pull and it ended up ****ing up my rear fenders. as you can see from the pic, i just got it out of a body shop and got everything nice a smooth. wekfest ready
Old 10-12-2011, 08:28 PM
  #17896  
-miltdoggie-
Registered User
iTrader: (18)
 
-miltdoggie-'s Avatar
 
Join Date: Aug 2005
Location: SoCal
Posts: 974
Received 4 Likes on 2 Posts
Default

DAMN cabron Phiooz!! Love it!
Old 10-12-2011, 08:47 PM
  #17897  
TehkMob
Registered User
iTrader: (23)
 
TehkMob's Avatar
 
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HUEY
sweet! seems like you pulled the rear quarter panels with the ordens, correct? I'm planning on running 19x9.5 +8, 19x11 +0 with 225/35 and 255/35..What will it take to fit them? I dont want to flare my quaters.
Actually I brought them in for the ordens and took out camber. Previous setup was 18x11.5 -24 out back. No pull just a GOOD roll and -4.5 camber def go a little more aggressive on the front offset cuz when you go low they are going to be sunk in quite a bit.. Expect to buy 20mm spacer.
Old 10-13-2011, 05:00 AM
  #17898  
HUEY
Banned
 
HUEY's Avatar
 
Join Date: Oct 2011
Location: gainesville, FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by phiooz
well before, i had a more aggressive setup 18x11.5 -23 in the rear so i had to do some pull and it ended up ****ing up my rear fenders. as you can see from the pic, i just got it out of a body shop and got everything nice a smooth. wekfest ready
ok i see, looks good now! did you have to do anything in the front fenders?

Originally Posted by TehkMob
Actually I brought them in for the ordens and took out camber. Previous setup was 18x11.5 -24 out back. No pull just a GOOD roll and -4.5 camber def go a little more aggressive on the front offset cuz when you go low they are going to be sunk in quite a bit.. Expect to buy 20mm spacer.
It'll just be different with running 19s instead of 18s on my car. So you think I should run offset in the negatives in the front to have it sit flush with the fenders?
Old 10-13-2011, 08:21 AM
  #17899  
Waiz
Premier Member
iTrader: (57)
 
Waiz's Avatar
 
Join Date: Feb 2008
Location: SoCal
Posts: 18,465
Likes: 0
Received 10 Likes on 8 Posts
Default

Originally Posted by VQpoweredZ
Phiooz that looks soo good. Must have more pics haha.


Black on gold is classy!
Old 10-13-2011, 09:49 AM
  #17900  
TehkMob
Registered User
iTrader: (23)
 
TehkMob's Avatar
 
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes on 0 Posts
Default

Phi, you use the same body shop as cheanyoung? (spell?)


Quick Reply: Aggressive Wheels and Stretched Tires....Welcome



All times are GMT -8. The time now is 02:41 AM.