Ok so heres the deal, I ordered a set of Work VS-XX in gold 19x9.5 +19 front 19x11 +23 rear. They have now arrived and I need your help on which tire size is best fit for these wheels. I'm dropping the car on tanabe gf-210's which is a 1.0 front and 1.2 rear drop, and my fenders aren't rolled YET but I think I will need to get that done because I'm sure the wheels will rub. Any help will be truely appreciated. Give me all ur opinions on stretched tires and meaty tires it doesn't matter im open to anything, I just want what looks best for my car.

 

Help Please Dammit! Lol

 

265x35 front and 295x30 rear

 

lower profile in the rear?

 

I didn't know you ordered wheels. Let me see if I can help. Give me a minute.

 

yea placed this order a lil less than 2 months ago! i still prob need my fenders rolled man! lol

 

i was thinkin about gettin 255/35/19 and 285/35/19 would that be fine??? or should i go for a more stretched look

 

275 mm in the rear. Roll the fenders. Get some serious negative camber. This is just for show right? I mean you don't really intend to drive this abomination.

 

I think Alvin was running 11s with similar offset and 285s. I could be wrong though. Definately gonna need to roll the fenders.

 

will i be rubbing bad without rolled fenders? i think imma go with wat i posted earlier. could i go to any body shop and get my fenders rolled?

 

How the fug is a 11" with a 23 offset going to fit?

That sticks out 18mm further than my 10.5 with 35 offset. I had to roll my fenders a tiny bit and have too much negative camber to get the tires to clear.

I need 295's bad.

 

i kno guys here who r running 0 offsets with 11's...anything is possible go to the...so you think ur Z/G is low thread

 

19x11+23 will fit easily with rolled fenders. Run a 285/35/19 rear or 295/30/19, roll and slightly pull your fenders, run ~-2.0 camber and it will work easily. We made AlvinhuyN's 19x11+17 fit with plenty of clearance with those settings. Don't even try to put them on without a roll though, it won't even be close to clearing

 

Definately need yoru fenders rolled. I have 19x10.5 with +22 offset and 285/35/19 rubbed. On Eibach pro-kit drop. around 1.0-1.2" drop in the rear. Alignment is at factory specs.

 

so by running a -2.0 camber i would have to get some rear camber arms?

 

I doubt it. just lower it.

 

hey dustin u think u still mite b able to roll my fenders for me?

 

-2 is factory spec for camber

 

275/30 should fit fine in front.

 

would the 265/35/19 front & 295/30/19 rears fit fine with no problems if my fenders r rolled???