Will 17 x 10 +12 offset fit in front ? I have 03 enthusiast . Thanks

 

17"

 

10"f
I'm going to say no. At 9.5+35, I only have about 8-10mm in the front left. At 10+12, You're going out past me by 19mm

 

yes

 

yes, it'll fit nicely. Think about it; people run 18x10.5 (+15) enkei RPF1s front and rear. A 10" wheel with a +12 will be 3mm more sunken than that. So yes,they'll easily fit.

 

Depending on what you consider the term FIT means. Poking out with stretched out tires and high camber or with normal tires , normal camber. I will have to say NO , cause i know my 17x9's +22 on 255 are flush.

 

stock fenders on stock suspension...MAYBE....rolled/cut fenders yes....just get 18's with a better offset...

 

I just ordered, but have not received yet, four 5Zigen FNO1R-C 17x10 ET 25 running Toyo RA1 255/40-17 too run a "square" setup on track days.....Based on researching every damn website I could find...I believe (hope) that they will fit the front (and rear) a mildly lowered (Hotchkis springs) 2006 Grand Touring w/Brembos. I should receive my wheels/tires from Edge racing by this weekend...I will post some pics them.

 

that setup should work.

 

Fronts are "rolled" from factory, there is no lip, you cant cut them. They provide the most clearance short of pulling the fenders.

 

they'll easily fit, especially with that offset. You may find the need for a little more tire out back. Keep an open mind as you may decide on a 275 tire next season.

 

Did you ever confirm fitment and run the setup? If so what size tires did you mount?

 

I doubt it. 90 percent of members who ask about extreme wheel-tire combinations never follow through.