JennZ350

I still have stock wheels and I really need to find something but I'm having a hard time picking and deciding on what to get. Any advice or suggestions on what brand to go with?

Zexy

iTrader: (55)

Volk, Work, SSR, Jlline, stick with reputable brands, non cheap cast brands.

JennZ350

I REALLY want the Work XT7's but I would rather have 19's...and the dont make them.

davidv

iTrader: (2)

MethodRN

iTrader: (13)

If you're looking for 19's I'd suggest Volk. If you're on a budget I suggest looking in the classifieds. Tell us more info about your car and I'm guessing this is a DD. If so, you also need to think about tire wear and remember that 19" tires cost more.

JennZ350

Yeah its a DD.
I just lowered it 1.2 inches all the way around (S-techs).

I think I narrowed it down.....

1. Nismo's
2. Volk TE37's
3. Axis Hiro's

terrorist22

TE37s and Nismos are very popular here; you can't go wrong w/ either unless you want to stand out on this site. I do not recall what the Axis's look like

black06z

iTrader: (1)

You can't go wrong with either of the top 2. Now, you just gotta figure out the width, offset, and tire sizes to go along. Good luck!!!!

MethodRN

iTrader: (13)

Can't ever go wrong w/ Volk and since Nismo is made by Ray's then same vote of confidence goes for them too.

Both designs are timeless and will always look good. So if your car is not a show car and you don't need the WOW factor of having rare wheels then those are your best bets. Not sure in ATL but both are still pretty rare around town anyways. It's just like everyone has them on the interweb!

As for sizes, if you go w/ TE37 or LE37s the standard 19x9.5F and 19x10.5 with 22 offset is best. As for tires, since it's a daily and I'm guess you want as much proection from potholes I'd suggest the 255/35/19F and 285/35/19R combo. This will require rear fender modification though.

As for Axis, I'm sure they have fixed their cracking problem but there have been issues with that particular model having cracking issues. Not sure if you'd be willing to risk it.

If you go w/ Volk let your first call/PM be to Andy@performance (SN on here) for a set.

dut

iTrader: (2)

I liked my HREs.

MethodRN

iTrader: (13)

Great wheels too but will cost you a pretty penny!

dut

iTrader: (2)

Yea, I couldn't afford them this time around... I had to settle for VOLKs.

blueper4mancez

iTrader: (25)

there's alot fo wheels that are made for the Z in the classified forums . can't go wrong with volk though . ( i only buy volks )

JennZ350

I just bought gloss black/polished lip 19" AXIS.

Thanks for your opinions though guys!

2004Black350z

iTrader: (37)

hahaha 4 the HATERS............ROTAs!!!!!!!

JennZ350

Lol

steppinrazor

iTrader: (1)

every one else and there mothers on this forum have volks, high quality, good looks.. but god damn, so played out.. check em out!

steppinrazor

iTrader: (1)

which ones did you get? im looking at gettin those reverbs in black w/polished lip.. i saw them on a z recently and it looked bad ***... im also looking at a set of enkei's.. and surprisingly enough!... some volks, yes yes played out, but oh so pretty

nevermind..i found it, there hiros.. they were having problems with them a while back but from what i heard they fixed the issue. there good lookin wheels

dut

iTrader: (2)

Speaking about PLAYED OUT... I ordered some WORK VS-XX. I think these are the MOST played out wheel on G35s.

steppinrazor

iTrader: (1)

maybe.. but there still hella pretty dude!