I have been searching for a long time with no real results. I'm looking for pictures of 18x10.5's with a +15 offset. If you have something very close post that up. I'm sure I will have to roll the rear fenders some.

 

ur in luck... 18 x 10.5 +15 (f) +0 (r)



same wheels but on bradley's Z instead of dustin's....

 

love the 0 offset in the rear but +15 on a 10.5 in the front looks too 4x4 ish to me.

 

Thanks man, but I need to see what that would look like on the rear. Side shot if possible.

That fitment looks sick.

 

there is a side shot up there? lol

 

wow dude...nice wheel setup, looks awesome

 

BTW these are DUSTINZ33's wheels & set up not mine! lolol.

-Olivia

 

And she is not a dude - yes another hot chick in a Z!

 

hahah its all good. =)

 

I'll try to find you a pic of when I had the rears on without the spacer.

 

here's a really crappy picture I took when I first put on the wheels. This picture was taken when I was dropped on the Tanabe GF210s. I'm running 265/35 so if you're looking to do a beefier tire setup then it will fill the fender up a little better. I ran smaller so I could use a 15mm spacer in the rear and rotate my wheels.


Here's a picture now.

 

18x10.5" +15 Nismo on all four: https://my350z.com/forum/showpost.ph...2&postcount=14

 

I have seen that and I'm sorry, but it doesn't look like a Z to me. I want to know what 18x10.5 +15 offset will look like on a Z.

 

well that first pic Dustin posted was without the spacer so its 18x10.5 +15

 

This one.
Attachment 179891

Looks like it should work ok with my setup.

 

hey guys/lady, 18x10.5 +15 will have roll fender issue?

 

I figured that.

Just wanted to see some pics. I'm not super low so it isn't to much of a problem.

 

You should be able to use a fatter tire setup in the rear with the +15. My first pic was without the spacer and before I cut my 1/2" off of my rear upper spring mount.

 

Thanks,

I'll be running 275 for a little bit untill I figure out what will fit with my setup. Should end up with a 285 or 295.

 

yes you will have to roll your fenders.