Update w/pics: 295/30/19 on 19"x10.5" +17 offset
#1
Update w/pics: 295/30/19 on 19"x10.5" +17 offset
well my Vredestein Sessanta arrived and had it mounted. I rode on it for a bit and so far no rubbing. Last alignment I had about a couple months back was -2.6 camber rear. So, I'll see how much has changed since then.
Wheel specs:
Volk SF-Winnings
F: 19x9.5 +19 255/35/19
R: 19x10.5 +17 295/30/19
I was running 285/35/19 Goodyear Eagle f1 and they were wider/flatter on the the sidewall than the Vredestein 295/30/19. The Vredestein are more rounder.
I asked around here if anyone had the +17 10.5" with 295 and seems like no one was running it. Thread here
So, for reference I guess it can done. Of course fender rolling is needed. BTW, lowered on Tanabe GF210 on stock 2006 shocks.
Pics:
Better pics next photoshoot
Wheel specs:
Volk SF-Winnings
F: 19x9.5 +19 255/35/19
R: 19x10.5 +17 295/30/19
I was running 285/35/19 Goodyear Eagle f1 and they were wider/flatter on the the sidewall than the Vredestein 295/30/19. The Vredestein are more rounder.
I asked around here if anyone had the +17 10.5" with 295 and seems like no one was running it. Thread here
So, for reference I guess it can done. Of course fender rolling is needed. BTW, lowered on Tanabe GF210 on stock 2006 shocks.
Pics:
Better pics next photoshoot
Trending Topics
#8
Originally Posted by jjellyneck
So....how does the Vredestein handling compare to your former Goodyear tires?
By the way, excellent tire and wheel fit.
By the way, excellent tire and wheel fit.
I'll try and update when I have had more time with the tires.
#10
Registered User
iTrader: (5)
Join Date: May 2005
Location: america
Posts: 4,190
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by haeshik
nice setup, who knew mixing 3 diff. kits would look so good
#14
New Member
Not big on body kits, but I must say your setup looks great… absolutely great job on tire fitment and wheels (not to mention the superior pictures). You certainly have got it together.
--Spike
--Spike
Last edited by Spike100; 05-04-2008 at 05:15 PM.
#19
Thx for the compliments all.
To answer your question:
Based on the offset calculator: http://www.1010tires.com/WheelOffsetCalculator.asp
Compared to a 10.5" +17 rim
Inner clearance is 12mm less
Outer Position is about the same
So with 285/30, I think it can work, though of course you have to roll the fenders.
To answer your question:
Originally Posted by OneManJoker
will 285/30/19 be fine on R-19x11+23....
Compared to a 10.5" +17 rim
Inner clearance is 12mm less
Outer Position is about the same
So with 285/30, I think it can work, though of course you have to roll the fenders.