Depends on the type of tire. Some are much wider/flatter sidewall than others. I've gone through Michelin PS2 and Goodyear Eagle F1 on my 19's, and they sure do have wider sidewalls than my current Vredestein Sessanta.

295/30/19 should fit on a non-lowered, fender rolled Z w/10.5" +18. I run that same tire with 10.5" +17 rear lowered 1.2" with Tanabe GF210. May have to run with slight camber from stock though.

 

 

Listing a tire/wheel setup without wheel offset is incomplete and frustrates the readers. When I see this, I wonder if the owner even knows the offset.

It would also be helpful if the poster/owner reveals whether or not the fenders are rolled, and if there is any rubbing under full suspension travel.

--Spike

 

RE30 19x11 +25 OFF. 285/35/19 NITTO INVO, Fenders cut

 

Give me 2 weeks, I'll be back with 295's =)

 

Posters probably don't know their own offsets LOL. The OP never asked for specs just pics.

Anyway my 19x10.5's are 35mm offset tires 305/30/19 potenzas. Rear Dropped 1.25" tweaked the lip a tiny bit and the sidewall grazes the protective shock boot under moderate to heavy compression.

I don't however know the camber but would be willing to bet a members redline painted wheels it's out of spec.

 

But it would help when people search for this type of info.

 

just updated my post w/ the details....

 

That looks so much better tucked...

 

Old thread I know. The pics I posted long time ago here were the only ones I had and didn't show much.

Here is a better pic 305/30/19 on 10.5' rim 35 offset.

 

https://my350z.com/forum/media-share...ber-shots.html