Axis Se7en Mod 20x9 and 20x10 fitment on 350z
i have these with 15mm spacers all around. they rub a little in the back, but not the front. i got 285/30/20 on the rear tires. they are stunning on my superblack Z. i get looks everyday!
Thread Starter
Registered User
Joined: Jan 2005
Posts: 226
Likes: 0
From: hayward, ca
when we say 20mm spacers is it 10mm on each wheel? or is it 20mm on each wheel?
I'm using this calculator here:
http://www.1010tires.com/WheelOffsetCalculator.asp
I have stock 18" touring
which is:
Front
Size: 18x8.0
Offset: +30mm
Weight: 24.4
Tire: 225/45/18
Rear
Size: 18x8.5
Offset: +33mm
Weight: 25.8
Tire: 245/45/18
the axis 7 mod's are
20x9 +37
20x10 +38
the calculator says 20mm less, what does that mean?
I'm using this calculator here:
http://www.1010tires.com/WheelOffsetCalculator.asp
I have stock 18" touring
which is:
Front
Size: 18x8.0
Offset: +30mm
Weight: 24.4
Tire: 225/45/18
Rear
Size: 18x8.5
Offset: +33mm
Weight: 25.8
Tire: 245/45/18
the axis 7 mod's are
20x9 +37
20x10 +38
the calculator says 20mm less, what does that mean?
Last edited by MyIS300; Dec 1, 2008 at 12:55 PM.
Registered User
iTrader: (5)
Joined: Mar 2008
Posts: 707
Likes: 0
From: Hawaii to Seattle soon Cali.
https://my350z.com/forum/north-west/...-his-ride.html
Here is a link to a pic of my car with same Axis wheels you are looking at. Im running 265/35/20 up front and 285/35/20 in the rear. There are no spacers on during the pic, but I will be putting 20mm spacers on all four corners. I want the wheels more flush with the fenders.
Also I'm lowered on Tanabe Gf210 springs with a mild rear fender roll.
Here is a link to a pic of my car with same Axis wheels you are looking at. Im running 265/35/20 up front and 285/35/20 in the rear. There are no spacers on during the pic, but I will be putting 20mm spacers on all four corners. I want the wheels more flush with the fenders.
Also I'm lowered on Tanabe Gf210 springs with a mild rear fender roll.
Last edited by EIGHT08FLIP; Dec 2, 2008 at 07:22 AM.
Trending Topics
you want 15mm spacers on each corner. do not go more than 15mm spacers in the rear unless you plan on running camber and lowering your ride, as well as rolling your fenders. in the front, 20mm is good. they are actually quite light wheels if for 20's. i put 20" in the rear and 19" in the front. i like it a lot
Thread Starter
Registered User
Joined: Jan 2005
Posts: 226
Likes: 0
From: hayward, ca
Front
Size: 20x9.0
Offset: et37
Tire: 255/35/20
Rear
Size: 20x10
Offset: +38et
Tire: 255/35/20
What does everyone think of this setup?
What PSI should I be at with this setup?
Should I get 20mm spacers all around?
Size: 20x9.0
Offset: et37
Tire: 255/35/20
Rear
Size: 20x10
Offset: +38et
Tire: 255/35/20
What does everyone think of this setup?
What PSI should I be at with this setup?
Should I get 20mm spacers all around?
Last edited by MyIS300; Dec 12, 2008 at 01:25 PM.
