digital tire gauge issue
#2
350Z-holic
iTrader: (26)
They're supposed to be ±1 PSI, so obviously something is off. Are you saying that all four in the car read 42 but when you read it with a tire pressure gauge, that reads 32 psi?
I doubt that all four in the car would go bad at the same time so that makes me suspect your tire gauge. What kind are you using? One of those $5 pencil gauges or some cheap plastic dial gauge? Those things are notoriously inaccurate.
You need to be using a high quality gauge like one of these...
I doubt that all four in the car would go bad at the same time so that makes me suspect your tire gauge. What kind are you using? One of those $5 pencil gauges or some cheap plastic dial gauge? Those things are notoriously inaccurate.
You need to be using a high quality gauge like one of these...
#5
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Are you checking the correct tire ??? Ive seen the sensor swapped around before. It does throw people off.
#7
i do have this problem, all 4 are reading about 3-5 psi off. read some blogs, some people are having this issue.
manual cking is 35, computer gauge states 30-32 even sometimes 27 when it's really cold.
manual cking is 35, computer gauge states 30-32 even sometimes 27 when it's really cold.
Trending Topics
#8
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
The colder it gets the less pressure you have. Pressure needs to be set when the tire is cold, its best to do them in the garage in the morning before the car is moved for the day.
#10
guys, it's very very obvious that Z gauge has problems. We all know the basics, cold, time ran, and ....
some are having this issue and some dont, but it's apparent there is such issue.
Just as the other issue they have, 06 Z has paint issues in the interior, basically batch to batch issue as well.
some are having this issue and some dont, but it's apparent there is such issue.
Just as the other issue they have, 06 Z has paint issues in the interior, basically batch to batch issue as well.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM