currently running 19x10 rims with kdw 265/30/19 they are too low of profile. And 1st through 3rd cant hook up for ****.
Would like to run 285/35/19 what is the best brand for traction right now im kinda leaning towards goodyear.I dont want drag radials. Any help would be great.

 

Are you FI? What kind fo power are you putting down?

 

yes FI putting out around 400whp 375wtq

 

On the front, correct? On the rear 285/35, 295/30 or 305/30's would be great.

 

front has nitto's 255/35/19 they are taller then the rears. Front rim size is 19x8.5

I thought about 305's but not sure if they will mount right on a 10'' wide rim. Im not sure on the offsets of the rims they are MSR 088 series. Using a 15mm spacer on rear to get the tire away from the tein coilovers. Hand only about 1mm clearance before the spacer install. Should have got 20mm spacers. When I get off work I will post a pic of the rears on there right now.

 

https://my350z.com/forum/wheels-and-...uld-i-get.html

 

Hmm I would go Toyo T1R 285 and for dragging may be -1 or -0.5 camber will help grip.

 

Depends on which GY, but in my experience, they're all pretty lousy. Some track/street guys like the GSD3, but they were too soft for me.

I like the Bridgestone RE050As, S02, S03s, and Michelin PS1 and PS2s myself. I also got very good traction with a few sets of Falken Azenis RT615s, but poor wear. Their 200 rating was certainly inflated, but my car hooked surprisingly well in 2nd gear with lots of power. It's a wonder what fresh rubber can do for grip.

 

 

Trojan Ribbed

 

Win

 

when did i ever say that. I want more power when you hit 600whp it gets to much for street. Is that quote fabercated or what i would like to know were i said that.

 

BTW I went with 285/35/19 ps2's They are better but still not as wide as I would like.