Im looking to buy some gt 7 volks from a friend and i was wondering if this is to much. Its on a nsx will it fit a 350z? and the sizes are. 18 x 8 in the front, back is 19 by 9.5, Is this to much?

 

if it's too much what?

 

with and set to far off?

 

im saying with it being 18 x 8 in the front and 19 x 9.5 in the back. The with is 1.5 inch apart, is it to much?

 

what is the offset? that is what you need to know

 

k ill find out the offset, what will it cause if it is? and which offset am i aiming for? and what offset can i get by with?

 

You want to be in the low +20's at least for offsets...

 

agree^^ between +18 and 23+ is a good number for the offests to be.

People will take up to +30 though.

 

if its higher, lets say 30 , what will i be risking?

 

A higher offset will mean the wheel will sit further in, in your wheel well. A lower offset will bring the wheel out of the wheel well and make it look more aggressive and will look better.

With those widths, an ideal offset would be +11 to +20 for the front wheels, and +17 to +24 for the rear wheels.

I have these exact wheels with these specs and they fit very flush to the fender of the Z:
front 8.5" offset = +11
rear 9.5" offset = +17

 

well the offsett are in the high 30's. and the front ones are 8.5,
we put them on today and they def need spacers. about 5 m

 

the back is 39 i think and the front one were mid 30's. Hes asking 2200 for them but i would need to replace the front 2 tires. I think the prices are a little bit steep or am i wrong? the rims look like they have alot of wear and tear on them plus very minor scratches on all 4.

 

save that money and get some volks that will fit (right size and offsets) from a vendor here

 

yeah thats what im thinking. Im subsiding to much for a deal but they sure due look nice on the z : )