going to pick up some ame tomorrow

size are as as fallow

18x10.00 all around 10+offsett all around

im sure the rear will be fine but im concerned about the front being to wide

my car is also equiped with brembos i will be runing 245 40 18 in the front and 265 35 18 in the rear

will my fenders in the front need to be rolled?spacers?any info or feedback will be appreciated

 

answers

 

245 is way undersized for a 10" wheel. The "stretch" may make the front work. Why would you want to put spacers on?

Ask the stretch tire boys here: https://my350z.com/forum/wheels-and-...s-welcome.html

 

Rear tires are shorter than the front tires, back to the drawing board.

I could post my recomendations, but i'll let you do a little ground work.

Hint , rears need to be a little taller than the fronts 1/4 to 3/4 inch works great

 

The front size you have would be fine, but you need to have 265/40s in the back.

This site is a good resource:
http://www.1010tires.com/TireSizeCalculator.asp

 

A 245 mm tire will be pretty cool on a 10 inch wheel.

 

I hope you can tell that david is being sarcastic.

If you want the 35 series in the back then you should run a 35 up front. If I were running that wheel setup I would likely run a 255-265/35 up front and 275-285/35 rear. The brand makes a difference as well since they all run a little different.